Russound CAV6.6-S2 instruction manual Installation Menu, Menu Item, Procedure, Feature

INSTALLER

INSTALLATION MENU

There are three item types in the installation menu:

Menu Item –	Acts as a folder that holds procedures and/or feature parameters.
Procedure –	A sequence of feature parameters to perform a guided operation, such as
	configuring an UNO key. Once you begin a procedure, the system will prompt for
	the needed information to complete the task.
Feature –	The actual parameters (settings) that will change the system configuration.

The following keys on the UNO-S2are used to navigate and make changes while using the installa- tion menus:

To enter the Installation Menu, press and release the Setup Button (located on the keypad’s right side) while in normal operating mode. The Setup Button is used to “back out” of the Installation Menu one level at a time. If you are performing a procedure, the Setup Button brings you back to the beginning of the procedure. Once you have reached the top level of the Installation Menu, pressing the Setup Button brings you back to normal operating mode.

Adjust feature setting (increment).

Adjust feature setting (decrement).

Go to next menu / procedure / feature. Not available while performing a procedure.

Go to previous menu / procedure / feature. Not available while performing a procedure.

Enter menu / begin procedure / show current feature setting. While performing a procedure, it is also used to advance to the next sequential feature setting once the current feature has been viewed or adjusted.

UNO-S1 Keypad Five-character Display

The UNO-S1 keypad abbreviates information as necessary to appear in its five-character display. In the following menu procedures, the UNO-S1 five-character abbreviation is shown in parentheses underneath the 12-character version.

54