Russound CAV6.6-S2 Macro Editor cont’d, #Controllers, Build Time, Build Date, Version

INSTALLER

INSTALLATION MENU

Macro Editor (cont’d)

i. LEARNED SRC –	Select the learned source bank to be assigned to the source
(LnSrc)	component. Procedure advances to KEY FUNCTION (step 6)
b. Selected: Unassigned	Selected command and subsequent commands are cleared.
(Unasg)	Procedure advances to COMMAND NUM (step 3)
c. Selected: Default	Default selects the same device type and device code previously
(Deflt)	setup in BASIC SETUP. Procedure advances to KEY FUNCTION
	(step 6)
d. Selected: Macro:
i. MACRO -	A macro can “call” another macro if a sequence of more than 10
(Macro)	commands is needed.
ii. MACRO ID –	Enter the macro ID number. Menu advances to COMMAND NUM
(MacID)	(step 3)
e. Selected: Delay	Enter a 1- to 60-second delay time to postpone delivery of the
(Delay)	next command in the macro. Procedure advances to COMMAND
	NUM (step 3)
f. All Other Selections:	Procedure advances to DEVICE CODE (step 6)
5. DEVICE CODE –	Source component code for IR control.
(DevCd)
6. KEY FUNCTION –	Select a function (Play, etc.).
(KeyFn)

SYSTEM INFO (SInfo)

System Info allows the installer to view the controller’s manufacturing build properties.

See Installation Menu on Page 55 and System Info - Flow Chart on page 77

#CONTROLLERS (#Ctls)		BUILD TIME (BTime)	BUILD DATE (Bdate)	VERSION (Ver)
1.	#CONTROLLERS -	Displays the number of CAV6.6 controllers in the system.
	(#Ctls)
2.	BUILD TIME -	Displays the Software Build Time of the controller.
	(BTime)
3.	BUILD DATE -	Displays the Software Build Date of the controller.
	(BDate)
4.	VERSION -	Displays the software version of the CAV6.6.
	(Ver)

66