INSTALLER
MAKING CONNECTIONS
RNET Link In and Link Out - RNET-enabled Components
The RNET Link In and Link Out is also used to connect the CAV6.6 to other Russound RNET-enabled products. The connection is made using a CAT-5 patch cable from the Link Out of the controller and into the Link In of the RNET- enabled component. Another CAT-5 patch cable can be used to link out of that component and link into another RNET-enabled component in the system.
RNET-enabled components fully integrate with CAV6.6 and CAM6.6 multi-zone systems. They communicate through the RNET Link In and Link Out connection. These components can be con- trolled via the UNO keypad or the UNO-LRC1 remote control, and display source information on the keypads. The CAT-5 patch cable should not exceed 18 inches in length.