INSTALLER
INSTALLATION MENU
The following items make up the Installation Menu:
SOURCE SETUP (SrcSu) ZONE SETUP (ZonSu) CTRLR SETUP (CtlSu)
POWER MGT (PwMgt) LEARN IR (LrnIR) MACRO EDITOR (MacEd) SYSTEM INFO (SInfo)
SOURCE SETUP (SrcSu)
Source Setup allows the system’s sources to be configured.
The following items can be found in the SOURCE SETUP menu:
BASIC SETUP (BasSu) KEY CONFIG (KeyCf) SOURCE NAMES (SrcNm) SRC VOL TRIM (SrcVT) NUMERIC IR (NumIR) SRC SEL CMD (SrcSC)
# OF SOURCES (#Srcs)
BASIC SETUP (BasSu)
NOTE: The BASIC SETUP procedure should be performed for each source before proceeding to other source setting changes.
This procedure uses
1. | SOURCE NUM – | Select the source to be configured. |
| (Src #) |
|
2. | SOURCE NAME – | Select the name for the source (e.g., DVD, Aux 2, Jazz, etc.). |
| (Name) |
|
3. | COMMAND TYPE – | Select the type of command template (e.g., CD, TV, etc.). Selecting |
| (CmdTp) | the command type template will tell the CAV 6.6 how to configure the |
|
| key’s command and text for the source component. |
| a. Selected: Learned IR | Choose Learned IR if the |
| (LrnIR) | not support the source component. |
| i. LEARNED SRC – | Select the learned source bank to be assigned to the source |
| (LnSrc) | component. (See Learning IR procedure for instructions on how |
|
| to learn IR codes.) |
55