Russound CAV6.6-S2 Learn IR cont’d, Learned SRC, Learn/Delete, Test IR?, Success?

Number of Macro up to 132 including any previously named macros.

Name of Macro (optional).

Number of Command up to 10.

Select the type of source command (e.g., CD, TV, etc.).

Choose Learned IR if the pre-programmed IR code library does not support the source component.

		INSTALLER
		INSTALLATION MENU
Learn IR (cont’d)
1.	LEARNED SRC –	Select the source whose commands will be learned into the con-
	(LnSrc)	troller.
2.	KEY FUNCTION –	Select the function to be learned or deleted.
	(KeyFn)
3.	LEARN/DELETE –	Select Learn IR Now or Delete IR. If Learn IR Now, a “USE
	(Ln/Dl)	REMOTE” prompt appears. Point the learning remote at the
		controller’s IR window. If Delete IR, procedure returns to
		LEARNED SRC (step 1)
4.	TEST IR? –	If “yes,” sends the learned command to the source component
	(TstIR)	to test the IR. If the component responds, the IR test was a
		success. If the component does not respond the Code was not
		learned properly. If “no,” menu goes back to LEARNED SRC
		(step 1)
5.	SUCCESS? -	Asks if the IR test was a success
	(OK?)	IF YES - If the test was a success, specify “yes” and proceed to
		KEY FUNCTION (step 2)

IF NO - If the test was a failure, specify “no” and LEARN/DELETE (step 3) reappears on the display allowing another code to be learned in.

MACRO EDITOR (MacEd)

This procedure is used to create a sequence of commands that are launched with one key touch or other event. Up to 132 macros can be created for the system, and each macro can contain up to 10 commands including other macros. See Installation Menu on Page 55 and Macro Editor - Flow

Chart on page 76

1. MACRO ID – (MacID)

2. MACRO NAME – (MacNm)

3. COMMAND NUM – (Cmd#)

4. COMMAND TYPE – (CmdTp)

a. Selected: Learned IR (LrnIR)

65