Vulcan-Hart 2GR85MF, ML-136422, 1GR35M Operation, Filtering Procedure When Using Liquid Shortening

Page 20

GRM SERIES GAS FRYERS

Operation

Hot oil and parts can cause burns. Use care when operating, cleaning and servicing the fryer.

Spilling hot frying compound can cause severe burns. Do not move fryer without draining all frying compound from the tank.

Never run water or boil out solution through filter and motor / pump. Doing so will void your fryer warranty.

Solid shortening should NOT be used with GRM fryers. Melting solid shortening will damage the tank and void your warranty.

FILTERING PROCEDURE WHEN USING LIQUID SHORTENING:

Oil Temperature should be 300-350° F. Use the provided crumb scoop to remove and suspend crumbs on the bottom of the tank before proceeding to Step 1.

1. Turn the Fryer temperature knob to the OFF position.

Do NOT heat the fryer during the filtering procedure. Permanent damage to your fry tank may occur and warranty may be voided.

2.Vulcan recommends adding an oil treatment media to the oil prior to filtering.

3.Turn the Filter Power switch to the ON position. Make sure that the filter drawer is closed completely and that the suction tube and receptacle block are in the correct position. Fig. 5

Fig. 5

VULCAN-HART

F-31233 Rev. F (January 2008)

-20-

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Installation Operational Manual Important for Your Safety Table of Contents Introduction Ordering PartsUnpacking GeneralInstallation Fryer Model No Device Serial No ClearancesCodes and Standards LocationUnited States CanadaGAS Connection AssemblyFlue Connection Fryers with Casters Testing the GAS Supply Piping SystemGAS Pressures ALL Models Operation OVER-TEMPERATURE ShutdownLeveling the Fryer Filling Tank with Shortening CleaningBefore First USE Lighting the Pilot Turning on the Fryer Turning OFF the FryerExtended Shutdown Basic Frying InstructionFry Basket Capacity Extending Shortening LifeDraining the Tank Cleaning Daily FilteringBoil OUT Procedure Weekly or as requiredGAS KleenScreen Plus Models 2GR45MF ShownFiltering Instructions for KleenScreen Plus Fryers Different from Screen Assembly Same Suction TubeFabric Envelope Insert Fabric Envelope Same Clip Same Knurled KnobDo not Wash Fabric Envelope StepFiltering Procedure When Using Liquid Shortening OperationFiltering TIP Removing Excess Debris from the FilterBoil OUT Procedure Flush and DiscardMaintenance Service in the US and CanadaFlue Vent Inspection Thermal Overload Protection ButtonTroubleshooting Chart

1GR45M, 1GR65M, 1GR85M, 1GR35M, 2GR45MF specifications

Vulcan-Hart is a renowned name in the world of commercial cooking equipment, specializing in high-performance solutions that cater to the needs of restaurants, hotels, and culinary enterprises. Among their impressive lineup are models ML-136422, ML-13, ML-136421, ML-136420, and ML-136417, each engineered to deliver exceptional results in food preparation and cooking.

The Vulcan-Hart ML-136422 is a powerful model that features a robust construction, designed to endure the demands of a busy kitchen. With a maximum temperature of 450°F, this unit ensures efficient cooking and uniform results. It often includes options for various cooking methods, enhancing versatility for chefs.

Similarly, the ML-13 is known for its compact design without sacrificing functionality. It offers a unique combination of infrared and convection technology, allowing for quick heat-up times and even cooking. This makes it an ideal choice for establishments that prioritize speed without compromising quality.

The ML-136421 model takes efficiency to the next level with its programmable settings, enabling operators to easily set precise cooking times and temperatures. This feature not only streamlines food preparation but also ensures consistency across dishes, essential for maintaining high standards in food service.

Moving on to the ML-136420, this model is equipped with advanced heat distribution technology, which guarantees that every dish is cooked evenly. With heavy-duty construction and multiple racks, it offers ample cooking space, making it suitable for larger operations that need to prepare multiple items simultaneously.

Lastly, the ML-136417 focuses on user-friendliness and accessibility. It includes an easy-to-read control panel and adjustable shelving, allowing chefs to customize the cooking environment based on their specific needs. This model is particularly beneficial for establishments that require flexibility in their cooking processes.

All these Vulcan-Hart models boast a combination of durability, efficiency, and innovative features. They are designed to help culinary professionals maximize productivity in their kitchens while delivering high-quality results. With features like consistent heat distribution, programmable settings, and compact designs, Vulcan-Hart's ML series stands out as a reliable option for various food service applications. Chefs seeking dependable and technologically advanced equipment will find these models highly beneficial in achieving their culinary goals.
Top Page Image Contents