Setting the clock manually
Normally your radio will set its clock automatically using the DAB radio signal. If no DAB signal is available and you need to set the time manually, please follow the procedure shown below.
1.Press the On/Off button to switch on the radio.
2.To set the clock time, press the Menu button once or twice as needed until "Main Menu" appears on the display. Rotate the Tuning/Select control until "Set up" shows on the display.
3.Press and release the Tuning/Select control to enter the Set up menu and rotate until "Clock" appears on the display. Press and release the Tuning/Select control to enter clock setup.
4.Rotate the Tuning/Select control until "Manual clock" appears on the display.
5.Press and release the Tuning/Select control to enter the manual setting procedure. The hour digits will fl ash on the display.
6.Rotate the Tuning/Select control to set the desired hour.
7.Press and release the Tuning/Select control to enter the hour setting. The minute digits will then fl ash on the display.
8.Rotate the Tuning/Select control to set the desired minute.
If you need any further advice, please call our Technical Helpline on :-
1
2
020 8758 0338
20