7.Alternatively you can press the Dimmer button on your radio to select the dimmer brightness from low, mid, high and an almost off
'night time' setting.
When the radio is in
rotary control will cause the radio to switch to the normal brightness level7 for a few seconds. This is so that even if the
is set to zero (almost off), it is still possible to see the time by quickly pressing a button.
Software version
The software display cannot be altered and is just for your reference.
1.Press the On/Off button to switch on the radio.
2.Press the Menu button once or twice as needed until "Main Menu" appears on the display. Rotate the Tuning/Select control until "Set up" shows on the display.
3.Press the Tuning/Select control to enter the Set up menu and rotate until "Version" appears on the display. Press and release the Tuning/ Select control the display will show the radio software information.
4.After a few seconds your radio will return to the normal radio display mode.
1
2
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338
30