Roberts Radio ecologic 7 instruction

17.Press and release the Tuning/Select control to enter the setting. The alarm source option will ﬂ ash on the display.

18. The alarm can be set to DAB, FM or buzzer. For whichever radio mode is selected, the radio alarm may be set to any of the stations which have been stored as presets or to the last station listened to.

Rotate the Tuning/Select control to highlight either 'Buzzer' or the required radio mode. Press the control to conﬁ rm the selection.

19.If setting the alarm to a radio option, rotate the Tuning/Select control to highlight the desired "preset 1 -10" or rotate until "Last played" is selected. Press and release the Tuning/Select control.

Note that you can only set the alarm to use a preset which has already been stored.

20.In order to store the alarm settings you will need to save the settings. Rotate the Tuning/Select control until "Yes" is highlighted on the display. Press the Tuning/Select control to conﬁ rm alarm settings and return to normal radio mode.

If you decide not to save the settings, highlight "No" and then press the control your radio will return to normal radio mode without saving the setting.

Note: If you make a mistake at any point while setting the alarm, press the Menu button to go back to the previous screen.

The radio alarm is indicated in the display by the symbol and the buzzer alarm is indicated by the symbol when in stand-by. When your radio is set to wake by the radio alarm, your radio will switch to either the selected preset station or last listened. Be sure to set the volume to a suitable level if using DAB or FM options.

17-20