To return to auto clock set mode
1.Press the On/Off button to switch on the radio. If necessary press and release the DAB/FM/AUX button to put the radio into DAB mode.
2.Press the Menu button once or twice as needed until "Main Menu" appears on the display. Rotate the Tuning/Select control until "Set up" shows on the display.
3.Press and release the Tuning/Select control to enter the Set up menu and rotate until "Clock" appears on the display. Press and release the Tuning/Select control to enter clock setup.
4.Rotate the Tuning/Select control until "Auto clock" appears on the display.
5.Press and release the Tuning/Select control.
6.The radio will immediately set its time according to the information received with the DAB broadcast. The radio will return to normal radio operation.
Note: If you select "Auto clock" and no DAB signal is found, you should either position the radio or its aerial so that a signal can be received, or revert to manual clock mode (see page 20).
If you need any further advice, please call our Technical Helpline on :-
1
1
2
020 8758 0338
22