Dimmer function

The brightness of the display can be adjusted for when the radio is in Stand-by and for when it is in use. If you use the unit in a bedroom, you may prefer a lower stand-by brightness level than the standard setting. The dimmer can be set to low, mid, high and an almost off 'night time' setting.

1.Press the On/Off button to switch on the radio.

2.Press the Menu button once or twice as needed until "Main Menu" appears on the display. Rotate the Tuning/Select control until "Set up" shows on the display.

3.Press and release the Tuning/Select control to enter the Set up menu and rotate until "Dimmer" appears on the display. Press and release the Tuning/Select control to enter dimmer setup.

4.To adjust the display brightness when the radio is switched on rotate the Tuning/Select control until "Active mode" is highlighted on the display.

To adjust the display brightness when the radio is in stand-by rotate the Tuning/Select control until "Standby mode" is highlighted.

Press the control to enter the selected brightness adjustment mode.

5.To adjust the brightness level rotate the Tuning/Select control.

6.The backlight level will change as the control is rotated so that you can see the effect of each setting. Note that the backlight is almost completely off at zero setting. Press the Tuning/Select control to set the level.

2-6