Operating your radio - DAB
1. Press the On/Off button to switch on your radio. The display will show "Now tuning" for a few seconds.
When fi rst switched on, the radio will be in DAB mode. After each use | 1 |
the radio will remember the mode used and then switch on in that mode the next time it is used.
2.If the radio has been used before, the last used station will be selected.
3.If this is the fi rst time that the radio has been used, then the fi rst station in the list of stations found during scanning will be played. The display will show the station name.
4.If no signals are found then "Station not available" will be displayed and it may be necessary to relocate your radio to a position giving better reception. You should then carry out a scan to fi nd stations as described on page 12.
7