System reset
If your radio fails to operate correctly, or some digits on the display are missing or incomplete carry out the following procedure.
1.Press the On/Off button to switch on the radio.
2.Press the Menu button once or twice as needed until "Main Menu" appears on the display. Rotate the Tuning/Select control until "Set up" shows on the display.
3.Press the Tuning/Select control to enter the Set up menu and rotate until "Factory Reset" appears on the display. Press and release the Tuning/Select control. Rotate the Tuning/Select control and highlight 'Yes' to proceed.
If you do not wish to carry out a system reset, highlight "No" and then press the control.
4.With "Yes" highlighted, press the Tuning/Select control.Afull reset will be performed. The station list and presets will be erased. The alarm setting will be cancelled, display brightness and sleep timer settings will be set to their default values. The clock will be reset and the unit will behave as when fi rst switched on (see page 6).
In case of malfunction due to electrostatic discharge, reset the product as described above to resume normal operation. If you are not able to perform the reset operation as above, removal and reconnection of the power supply and batteries may be required.
If a problem persists our technical staff would be pleased to offer any assistance on operating the radio. Our technical helpline number is 020 8758 0338.
1
2
33