Roberts Radio ecologic 7 manual Headphone socket, USB socket for software upgrade, Clock display

Headphone socket

A3.5mm Headphone Socket located on the rear of your radio is provided forusewith either headphones or anearpiece. Insertinga plug automatically mutes the internal loudspeaker.

Please be aware that sensitivity of headphones can vary widely. We therefore recommend setting volume to a low level before connecting headphones in the radio.

IMPORTANT:Excessive sound pressure from earphones and headphones can cause hearing loss.

USB socket for software upgrade

A USB socket is provided at the rear of your radio for service use only to permit the possibility of updates to the internal software in the future.

If you register your product at www.robertsradio.co.uk/register and include a valid e-mail address you will receive notifi cation of software updates.

Clock display

When your radio is in Stand-by mode (when running from the mains) the time and date will be displayed. The time is always shown using a 24 hour clock format. When running the radio on batteries, the clock display may sometimes be shown when the radio is put into standby, before the radio switches off completely.

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

32