Vulcan-Hart ML-126212, ML-126210, ML-126451 manual Installation, Location, Legs / Casters, Assembly

Page 5

INSTALLATION

Immediately after unpacking the oven, check for possible shipping damage. If oven is found to be damaged after unpacking, save the packaging material and contact the carrier within 15 days of delivery.

Prior to installation, test the electrical service to assure that it agrees with the specifications on the machine data plate located on the right side panel near the controls.

The ovens and warmers are secured to the skid with four screws which must be removed.

LOCATION

WARNING: THE OVEN SHOULD NOT BE ACCESSIBLE TO THE CUSTOMER. HOT GLASS AND PARTS CAN CAUSE BURNS.

The oven may be placed where cooking may be observed to enhance customer awareness, but must be installed on a level surface.

The installation location must allow adequate clearances for servicing and for proper operation of the front and rear doors.

A minimum wall clearance of 10" (254 mm) from any glass, and 4" (101.6 mm) from each side panel must be maintained.

LEGS / CASTERS

Each oven and warmer is furnished on 19/16" (39.7 mm) legs. Casters come with the stacking kit or can be ordered as an accessory.

ASSEMBLY

Place the two bottom plates in oven. The two plates slant to the middle to allow fat to drip into the grease drawer (Fig.1).

PL-41161

Model VERO5 & VERO7

Fig. 1

– 5 –

Image 5
Contents Installation Table of Contents Page VERW7 Features and OptionsAssembly InstallationLocation Legs / CastersAssembling Stacked Devices Single Oven or Warmer Electrical ConnectionsStacked Ovens or Oven and Warmer Before First USE Electrical DataOven Control Panel Fig Main Power Dial 0 means OFFOperation Setting the Roasting Time Setting the TemperatureLoading Product Automatic Controls FigSetting End Time Delayed Start Setting an Early Warning BuzzerChanging a Setting Interrupting an Automatic Cooking OperationResetting the Automatic Control Setting the Time of DayStopping the Rotisserie Turning the Buzzer OFFProgrammable Controls Fig Programming Menu Buttons Verifying Programmed Temperatures and TimesChanging a Programmed Setting Displaying Time/Temperature During a Processing CycleStarting a Processing Cycle Interrupting a Processing CyclePreparing the Product Setting the End Time Delayed StartBaskets SpitsTying Legs Fig Unloading Spits From Oven Loading Spits Into OvenHhmm VERO5 VERO7 Suggested Roasting GuidelinesEmptying Grease Drawer Warmer Controls Fig Using Warmers Models VERW5 and VERW7Cleaning Warmers CleaningCleaning Grease Drawer Monthly Cleaning Quartz LampsModel VERO5 Oven only MaintenanceService and Parts Information

ML-126453, ML-126211, ML-126212, ML-126452, ML-126450 specifications

Vulcan-Hart is a leading manufacturer known for its high-quality commercial kitchen equipment, and the ML series, including models ML-126210, ML-126451, ML-126209, ML-126450, and ML-126452, exemplifies this reputation. These models are specifically designed to meet the demanding needs of commercial kitchens, offering a range of features and technologies that enhance performance, efficiency, and reliability.

One of the standout features of the ML series is their robust construction. Made from durable stainless steel, these units are designed to withstand the rigors of a busy kitchen environment. Their sleek, professional appearance not only looks appealing but also facilitates easy cleaning and maintenance, ensuring hygiene standards are met.

The ML series models are equipped with advanced temperature control technologies. Featuring digital thermostats and intuitive controls, they provide precise temperature management, crucial for cooking and holding food at the right temperatures for safety and quality. This level of control helps reduce food waste and improves overall kitchen efficiency.

Another key characteristic of the Vulcan-Hart ML series is their energy efficiency. These models are designed with modern insulation technologies that minimize heat loss, allowing for less energy consumption during operation. This not only translates to lower utility bills but also aligns with sustainable practices in the food service industry.

The versatility of the ML models is another reason they are favored in various commercial settings. Equipped with multiple cooking options, they can handle a diverse range of cooking methods, from baking to steaming, making them suitable for numerous food preparation tasks. This adaptability is essential for restaurants that require flexibility in their cooking processes.

Moreover, the ML series includes features that enhance safety in the kitchen. With built-in safety mechanisms such as automatic shut-off and cool-touch handles, these models prioritize the well-being of kitchen staff while minimizing the risk of accidents.

Overall, the Vulcan-Hart ML-126210, ML-126451, ML-126209, ML-126450, and ML-126452 models stand out for their durability, precise temperature control, energy efficiency, versatility, and safety features. These characteristics make them excellent choices for any professional kitchen looking to improve its operations and service quality. Investing in Vulcan-Hart equipment means choosing reliable performance backed by a trusted brand in the commercial food service industry.