3.Assemble heat shield to splasher back (Fig. 1). Top edge of heat shield must be placed inside the rear top flange of the splasher back.
CAUTION: It is essential that the heat shield in the back of the high shelf be installed in such a way that the bent section at the bottom be inward, touching the rear wall of the range, thereby allowing the stack action of the double wall back splasher to draw air through the area below the top surface units.
PL-40459
Fig. 1
4.With top cooking plates in their normal position, assemble splasher back to range and fasten in place with
Fig. 2
Fig. 3
– 7 –