Vulcan-Hart E36L, E48L, E24L, E60L manual Operation

OPERATION

WARNING: THE RANGE AND ITS PARTS ARE HOT. BE VERY CAREFUL WHEN OPERATING, CLEANING OR SERVICING THE RANGE.

CONTROLS (Fig. 6)

Oven		Element
Indicator	Oven	Control
Light	Thermostat	Knobs

Oven	Element
Infinite	Indicator
Switch	Light

Model E36L Shown

Fig. 6

PL-40464-1

Element Controls	— Infinite load switches that control and maintain heat to the surface plates.
		The controls are arranged in pairs; the left knob controls the front plate and
		the right knob controls the rear plate.
Element Indicator Lights	— When lit, indicate heat is being supplied to the element.
Hot Top Switch	—	(Not shown.)	A 4-heat switch (HI, MED HI, MED LO, LO) controls and
		maintains heat to the hot top section.
Griddle Thermostat	—	(Not shown.)	Regulates the amount of heat needed to maintain the set
		temperature. Each 12" (305 mm) section of the griddle has its own
		thermostat with a temperature range of 150°F (65°C) to 550°F (288°C).
Griddle Indicator Light	—	(Not shown.) Will be lit until the selected temperature is reached or when it
		is being maintained.
Oven Thermostat	—	Regulates the amount of heat needed to control and maintain oven
		temperature around the desired set temperature. The temperature range is
		from 150°F (65°C) to 550°F (288°C). Turn dial counterclockwise to increase
		temperature and clockwise to decrease temperature.
Infinite Switch for Oven	—	Provides directional heat control. Adjust as needed for the amount of
Top Heating Element		top heat required.
Oven Indicator Light	—	Will be lit until the selected temperature is reached or when it is being
		maintained.

– 9 –