Regulator Installation

REGULATOR CHECK, ADJUSTMENT, INSTALLATION (Cont.)

1.Connect the manometer to the pressure tap provided on the rear manifold pipe (see Fig. 23).

2.Check the reading. The reading should be 3.7" Water Column (.92 kPa) for natural gas and 10.0" Water Column (2.5 kPa) for propane gas.

3.If reading is incorrect and the proper line pressure has been verified, then the regulator must be adjusted. Using a standard flat blade screwdriver, remove the regulator adjustment cap (Figs. 26 & 27).

Fig. 26

Fig. 27

Insert the screwdriver into the adjustment shaft and turn the adjustment stop while watching the manometer until the correct pressure reading is achieved. Clockwise rotation of the stop increases pressure; counterclockwise rotation decreases pressure.

After resetting the pressure to the correct setting, reinstall the adjustment cap and remove the testing equipment.

TOOLS REQUIRED: Slip joint plier or pipe wrench.

NOTE: The pressure regulator must be attached to the unit in the horizontal position with the arrow pointing in the direction of the gas flow, unless at some point in time the regulator has been recalibrated (see Fig. 7).

1.Turn main gas supply “OFF”.

2.Remove old regulator.

3.Wrap the manifold pipe threads of the insulating end with pipe thread sealant.

4.Install new regulator as indicated by the above NOTE.

5.Turn main gas supply “ON” and check the regulator connections for gas leakage using a soap and water solution. If no leaks are found, return unit to full operation. If leak is detected, turn main gas valve “OFF” and eliminate leakage.

– 24 –

EG48, EG36, EG60, EG260, EG160 specifications

Vulcan-Hart is renowned for its commitment to producing high-quality commercial cooking equipment, and its line of electric griddles is a testament to this legacy. The Vulcan-Hart EG series, which includes the EG160, EG260, EG60, EG36, and EG48 models, is designed with efficiency, durability, and versatility in mind, making them ideal for restaurants, hotels, and catering services.

One of the standout features of the Vulcan-Hart EG series is its robust cooking surface. Each model is equipped with a polished, stainless steel griddle plate that ensures even heat distribution, promoting consistent cooking results. The griddles come in various sizes to meet different kitchen demands, with cooking areas that range from 36 inches to 60 inches wide. This variety allows operators to choose the right size for their specific needs, ensuring maximum output and efficiency.

The thermal efficiency of the EG series is further enhanced by its design. The griddles are equipped with powerful heating elements, which are recessed to provide an uninterrupted cooking surface. This not only contributes to excellent heat retention and recovery but also makes cleaning easier. Operators can enjoy reduced downtime while maintaining peak performance.

Safety and usability are also key considerations in the design of Vulcan-Hart griddles. Each unit features a temperature control system that allows for precise heat management, ensuring consistency in cooking temperatures. The griddles include adjustable legs for leveling, making them adaptable to various kitchen environments. Additionally, the high-quality construction and materials also make these griddles resistant to the rigors of a busy commercial kitchen.

In terms of technologies, Vulcan-Hart has integrated innovative designs into the EG series, such as built-in grease troughs and drains that facilitate easy cleanup. The sleek exterior is not just for aesthetics; it’s designed for easy maintenance and longevity in demanding kitchen settings.

Overall, the Vulcan-Hart EG series of electric griddles encapsulates a blend of performance, durability, and ease of use, making them an invaluable asset in any commercial kitchen. Whether you're cooking pancakes, burgers, or stir-fry, the EG160, EG260, EG60, EG36, and EG48 models are engineered to deliver outstanding results while streamlining kitchen operations.