Russound CAM6.6X-S1/S2 instruction manual UNO Keypad Port Connection

INSTALLER

MAKING CONNECTIONS

UNO Keypad Port Connection

The UNO System Keypad Ports are located on the back of the CAM6.6 in the top left of center. Connections made at the UNO Keypad Ports are made using CAT-5 T568A RJ-45 wire configura- tion. CAT-5 is color-coded for ease of installa- tion. For a clean installation when wiring from an UNO System Keypad Port use an RJ-45 CAT-5 patch cable to connect from the keypad port to an RJ-45 Wall Plate (optional). Using the same

CAT-5 T568A RJ-45 wiring configuration, use CAT-5 from the RJ-45 Wall Plate to the keypad. If using more than one keypad on a zone, con- nect a SA-ZX3 UNO System Keypad Splitter (optional) directly to the UNO System Keypad Port instead of going through the wall plate. Always use the CAT-5 T568A RJ-45 wire configu- ration when wiring any of the UNO System Keypad Ports.

CAM6.6X CAT-5 Cable

1201A/1A Power Supply

ANTENNA CAM6.6

CAT-5 Cable

PM Mod 3D with RJ-45 CAT-5 Cable

SA-ZX3

36