Russound CAM6.6X-S1/S2 instruction manual Selected Unassigned Unasg

Page 56

INSTALLER

INSTALLATION MENU

a. Selected: Learned IR (LrnIR)

i. LEARNED SRC – (LnSrc)

ii.TEMPLATE TYP – (TType)

b.Selected: Unassigned (Unasg)

c.All Other Selections:

4.DEVICE CODE – (DevCd)

5.TEST IR? – (TstIR)

6.SUCCESS? – (OK?)

7.USE NUM IR? – (NumIR)

8.HIGHEST NUM – (High#)

9.AUTO PLAY? – (AtoPl)

10.SAVE CHANGES? – (Save?)

Choose Learned IR if the pre-programmed IR code library does not support the source component.

Select the learned source bank to be assigned to the source component. (See Learning IR procedure for instructions on how to learn IR codes.)

Select the template type to define what type of source compo- nent is being used. (This will tell the CAM6.6 how to configure the key commands and text for the source component if it is a learned source.) Procedure advances to USE NUM IR? (step 7).

The template for the selected source is cleared. (All key assignments and other source settings will be erased.) Procedure advances to SAVE CHANGES (step 10)

Procedure advances to DEVICE CODE (step 4)

Enter source component code number listed in this manual’s Reference section.

If “Yes” is selected, the CAM6.6 sends a power command to the source component. If “No” is selected, the procedure advances to USE NUM IR? (step 7)

If the power to the source component was turned off, select “Yes” otherwise select “No.” By selecting “No” the Procedure returns to DEVICE CODE (step 4) to allow selection of another code number from the provided list.

Indicates the source component has numeric scrolling, such as multi-disc CD player (See NUMERIC IR Setup Procedure for advanced settings or more information). “No” advances menu to AUTO PLAY (step 9).

Enter the highest possible number; for example, a 100-disc CD player would have a max number of 100.

“Yes” tells the CAM6.6 to issue a PLAY command whenever the source is selected for listening. This option is skipped if the source type (COMMAND TYPE) chosen does not have a PLAY command associated with it.

Select “yes” to save changes. Procedure returns to SOURCE NUM to allow configuration of another source.

56

Image 56
Contents CAM6.6X-S1/S2 System Important Safeguards Table of Contents Making Connections Reference SectionComponent Guides OperationProduct Introduction CAM6.6 Controller-Front Panel Main Power and Zone StatusComponent Guide Blues UNO-S1 Keypad-Front PanelCD Player UNO-S2 Keypad-Front PanelUNO-LRC1 Remote Control Favorite 2 preset selectionsOperation UNO-S1 KeypadUser Menu Settings Feature and SettingParty Party Mode Master or Off UNO-S1 User Menu OperationUNO-S2 Keypad F1 and F2 ButtonsFeature and Setting 1. Bass UNO-S2 User Menu OperationTreble BalanceDisplay Condition Internal Source XM TunerXM Radio Overview UNO-S1 UNO-S2 UNO-LRC1 XM Radio ModesCategory Search Now Playing Display Preferences Next Preset Previous PresetPreset Mode Next BankCategory Search Mode Next CategoryPrevious Category Category Channel UpNow Playing Mode Display Preference ModeChannel Number CH Number Channel Name CH NameSelecting the desired channel UNO-S1 Keypad Control UNO-S1 Keypad Control of TunerSelecting the tuner UNO-S2 Keypad Control of Tuner UNO-S2 Keypad ControlXM Classics Setting a Memory Preset Recall Last ChannelUser Installation Menu Setup Menu Flow ChartsSample Configurations System Programming OverviewTools needed for installation Getting StartedUnpacking the System Components CAM6.6X-S1/S2 System ComponentsWiring Instructions Keypad WiringCAT-5 Wire Color Type Speaker WiringCAM6.6 Controller-Rear Panel Installer UNO-S1 Keypad-Update Port Data Rx TTL Level Data Tx TTL Level GND +12VDCUNO-S1 Keypad-CAT-5 Connection CAT-5 ConnectionUNO-S2 Keypad-Update Port Data Rx RS-232 Data Tx RS-232GND +12VDCUNO-S2 Keypad-CAT-5 Connection UNO-S1 KEYPAD-INSTALLATION Keypad LocationUNO-S2 KEYPAD-INSTALLATION UNO Keypad Port Connection Source Audio and IR Input Connections Source Audio ConnectionsSource IR Connections CAM6.6 with Optional Internal Source XM satellite radioCommon IR Connection Common IR ConnectionsSpeaker Connections Zone Fixed/Variable Audio Outputs 12VDC 100mA Trigger Out 12VDC Home Theater Trigger In/Out12VDC Home Theater Trigger 12VDC Mute Trigger Out 12VDC Mute Trigger In/Out12VDC Mute Trigger Rnet Link In and Link Out RS-232 Interface XM Antenna XM Signal Strength ModeOptional Internal Source XM Tuner Antennas Initial Install Test Flow Charts Pages Installation Menu PagesController Setup Ctrlr Setup Number of Sources # of Sources/SOURCE SetupBasic Setup Source Setup Pages Peripheral Setup Pages 53-55 for Optional Internal SourceSource Volume Trim Source Setup Numeric IR Source Setup PagesSetup Forms Mute Installer Installation Menu Overview UNO-S1 Keypad Five-Character DisplayBank # Memory #Memory Name All controllers Are you sure? Sure? Please Wait Cycle PowerBank Name Command Type Build TimeBuild Date VersionSelected Unassigned Unasg KEY Function KEY NameDevice Code Highest NUM Save CHANGES?Trim Level Numeric Text Prefix CMDSelected Learned IR Suffix CMDSRC SEL CMD SrcSC ZonVT Each zone. -16 dB lowest to 0 dB max-3dB default Syson EnableZON VOL Trim SysOnInstallation Menu Power on CMD OnCmd Learn IR LrnIR Learned SRCCommand NUM LEARN/DELETESUCCESS? Macro ID#CONTROLLERS Peripheral Setup Memory Name, Bank Name Flow Charts MenuSetup Menu Flow Charts Installer Periph Setup Installer Installer Mute Installer Installer LED on rear CAM Panel Blinks fast Installer Installer IR Codes Device Codes for TVsDevice Codes for Cable Device Codes for Video AccDevice Codes for Laser Disc Players Device Codes for SAT/DSSDevice Codes for VCRs Device Codes for DVD Players Device Codes for Tuner/AmpDevice Codes for Amp and Misc. Audio Device Codes for CD PlayersKEY Codes TV Hdtv KEY Function UNO-S1 TV HdtvSAP SAP, CC KEY Codes Cable KEY Function UNO-S1 CableSAP KEY Codes Video ACC KEY Function UNO-S1 Video ACCLanguage, MTS KEY Codes SAT/DSS KEY Function UNO-S1 SAT/DSSAlt/Audio,Lang.,CC KEY Function UNO-S1 VCR KEY CodesVCR KEY Codes VCR KEY Codes Laser Disc KEY Function UNO-S1 Laser DiscSubtitle, CC KEY Codes DVD KEY Function UNO-S1 DVDFormat Wide,Zoom,Aspect KEY Codes Receiver KEY Function UNO-S1 ReceiverDVD, LD KEY Codes AMP/MISC Audio KEY Function UNO-S1 AMP/MISC AudioTAPE, MD KEY Codes CD KEY Function UNO-S1Input Tape, MD KEY Codes Home Control KEY Function UNO-S1 Home ControlInput Source/Scene Source Names UNO-S1 UNO-S2Tivo Sample Configurations Multiple Controllers with ONE TunerMultiple Controllers with TWO Tuners Multiple Controllers with Three Tuners ST2-XM Tuner Back PanelMultiple Controllers with ST2 Dual Tuner ST2-XM Tuner Back PanelTechnical Specifications Warranty & Repair 113 114 115