Russound CAM6.6X-S1/S2 Build Time, Build Date, Version, Source NUM, Source Name, Command Type

		INSTALLER
		INSTALLATION MENU
1.	BUILD TIME	Displays the firmware Build Time of the tuner.
	(BTime)
2.	BUILD DATE	Displays the firmware Build Date of the tuner.
	(BDate)
3.	VERSION	Displays the firmware version of the tuner.
	(Ver)

SOURCE SETUP (SrcSu)

Source Setup allows the system’s sources to be configured.

The following items can be found in the SOURCE SETUP menu:

BASIC SETUP (BasSu) KEY CONFIG (KeyCf) SOURCE NAMES (SrcNm)

SRC VOL TRIM (SrcVT) NUMERIC IR (NumIR) SRC SEL CMD (SrcSC)

# OF SOURCES (#Srcs)

BASIC SETUP (BasSu)

NOTE: The BASIC SETUP procedure should be performed for each source before proceeding to other source setting changes.

NOTE: If the CAM6.6 has an optional internal source installed, it is pre-configured as Source 1, with source name <XM> and command type Peripheral.

This procedure uses built-in source “templates” to quickly and easily configure the source settings needed for basic operation of the source component. Before performing BASIC SETUP, connect the source components to the CAM6.6 as outlined in the Source Connections section. Also be sure that all sources are powered on. See Basic Setup - Flow Chart 69

1.	SOURCE NUM –	Select the source to be configured.
	(Src #)
2.	SOURCE NAME –	Select the name for the source (e.g., DVD, Aux 2, Jazz, etc.).
	(Name)
3.	COMMAND TYPE –	Select the type of command template (e.g., CD, TV, etc.). Selecting
	(CmdTp)	the command type template will tell the CAM6.6 how to configure the
		key’s command and text for the source component.

55