Russound CAM6.6X-S1/S2 instruction manual Common IR Connections

INSTALLER

MAKING CONNECTIONS

Common IR Connection

Common IR Connections

The Common IR jack on the rear of the CAM6.6 allows control of any source equipment without that source being selected on the keypad. The connection for the COM IR jack is made using an

IR emitter with a 1/8’’ plug. The Russound

845.1single IR emitter is recommended, or use an IR connecting block such as the Russound 857 which allows multiple units to be controlled through the COM IR Port.

ANTENNA CAM6.6

Alternate configuration using 857 IR connecting block

STATUS +12VDC

POWER +12VDC

IR RECEIVER IN

IR COMMON IN

+12VDC

857 INFRARED CONNECTING BLOCK		1 2
IR CONFIRM	EMITTERS	3 4

IR emitters to source equipment

GND	5
STATUS
SIGNAL	6

DESIGNED IN USA MADE IN KOREA

38