Top Stirrer Motor
Resistance through the top stirrer motor from the power cord (L) to CN04 pin 5 is approximately
6.7ohms. Isolated, the top stirrer motor is approximately 7.0 ohms. The door (primary interlock) must be closed to complete circuit. Check motor circuit for 21 VAC when operating.
Removal
Remove the microwave (see Microwave Removal and Component Access).
Disconnect the side stirrer motor electrical connector. Remove 2 screws and ground wire from the duct and move the duct out of the way.
Top Stirrer
Removal
Open the oven door. Pull the plastic rivet out of the stirrer cover. Rotate the stirrer cover CCW until it stops and remove the stirrer cover.
Rivet |
Remove the stirrer.
Note: When assembling, assure that the stirrer rides on the support in the cover.
Disconnect the electrical connector from the motor. Remove 2 screws that hold the motor in place and remove the motor.
Disconnect 
– 11 –