Surface Lamp Assemblies
Resistance through the surface lamps from the CN04 pin 3 to the power cord (N) is approximately 62 ohms.
Removal
Remove 5 screws from the bottom of the microwave oven cabinet and remove the bottom plate.
Remove the screw from each lamp socket and remove the lamp assembly from the oven. Disconnect the electrical connector.
Surface Lamps
Removal
Remove the screw on the surface lens panel and open the panel.
Pull the light out of the socket.
Note: When installing a new halogen bulb, be sure to handle the bulb with a clean, dry cloth.
Replace the halogen lamp with a 120VAC, 20W GE halogen lamp bulb (WB36X10213).
– 19 –