GE JT95230, JT91230 owner manual Operating Instructions Safety Instructions

Page 2

Operating Instructions Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.

IMPORTANT SAFETY NOTICE

The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California

to publish a list of substances known to the state to cause cancer, birth defects or other reproductive harm, and requires businesses to warn customers of potential exposure to such substances.

The fiberglass insulation in self-clean ovens gives off a very small amount of carbon monoxide during the cleaning cycle. Exposure can be minimized by venting with an open window or using a ventilation fan or hood.

SAFETY PRECAUTIONS

When using electrical appliances, basic safety precautions should be followed, including the following:

Consumer Support Troubleshooting Tips Care and Cleaning

Use this appliance only for its intended purpose as described in this Owner’s Manual.

Be sure your appliance is properly installed and grounded by a qualified technician in accordance with the provided installation instructions.

Do not attempt to repair or replace any part of your oven unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.

Have the installer show you the location of the circuit breaker or fuse. Mark it for easy reference.

Before performing any service, disconnect the oven power supply at the household distribution panel by removing the fuse or switching off the circuit breaker.

Do not leave children alone—children should not be left alone or unattended in an area where an appliance is in use. They should never be allowed to sit or stand on any part of the appliance.

Do not allow anyone to climb, stand or hang on the door. They could damage the oven, or cause severe personal injury.

Be sure the oven is securely installed in a cabinet that is firmly attached to the house structure. Never allow anyone to climb, sit, stand or hang on the oven door.

Never leave the oven door open when you are not watching the oven.

Always keep combustible wall covering, curtains or drapes a safe distance from your oven.

Always keep dish towels, dishcloths, pot holders and other linens a safe distance from your oven.

Always keep wooden and plastic utensils and canned food a safe distance away from your oven.

Teach children not to play with the controls or any other part of the oven.

Large scratches or impacts to glass doors can lead to broken or shattered glass.

2

Image 2
Contents Built-In Oven Write the model and serial numbers here Model # Serial #Operating Instructions Safety Instructions Consumer Support Troubleshooting Tips Care and CleaningSafety Instructions Cleaning Operating Instructions Safety InstructionsConsumer Support Troubleshooting Tips Care Support Using the oven controlsTroubleshooting Tips Consumer Fahrenheit or Celsius Temperature Selection Special features of your oven controlSafety Instructions Consumer SupportInstructions Operating SafetyTone Volume Tones at the End of a Timed CycleInstructions Cook and HoldTips Using the Sabbath FeatureCleaning Troubleshooting Designed for use on the Jewish Sabbath and HolidaysTroubleshooting Tips Using the ovenCare and Cleaning InstructionsInstructions Operating How to Set the Oven for BroilingSafety Broiling GuideUsing the clock, timer and control lockout How to Set a Delayed Start and Automatic Stop Safety InstructionsHow to Set an Immediate Start and Automatic Stop Operating Instructions CareHow to Set the Oven For Roasting When Using the Probe Using the probeInstructions Safety Convection Bake Using the convection ovenSafety Multi-Shelf Convection BakingConvection Roast Care and Cleaning OperatingHow to Set the Oven for Convection Baking or Roasting Paper and PlasticPress the Convection Roast pad Troubleshooting Tips Consumer SupportConvection Roasting Guide Press the Convection Bake or Convection Roast pad Using the timed features for convection cookingConsumer Support Troubleshooting Tips To Adjust the Thermostat Adjust the oven thermostat-Do it yourselfCleaning Troubleshooting Tips Consumer Support Type of margarine will affect baking performanceBefore a Clean Cycle Using the self-cleaning ovenOperating Instructions Safety How to Set the Oven for CleaningHow to Delay the Start of Cleaning Cleaning Troubleshooting Tips Consumer SupportAfter a Clean Cycle Oven Light Bulb Care and cleaning of the ovenHow to Remove Packaging Tape To removeLift-Off Oven Door Care and Cleaning Troubleshooting TipsCleaning the Oven Door Removable Oven FloorCare and Cleaning Operating InstructionsControl Panel Stainless Steel Surfaces on some modelsBefore You Call For Service… Problem Possible Causes What To DoNot open after a Clean cycle See the Using the self-cleaning oven sectionDuring clean cycle Hot or too coldA number See the Special features of your oven control sectionPower outage Or letter flashWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration What GE Will Not Cover GE Built-In Electric Oven WarrantyGE Will Replace Warrantor General Electric Company. Louisville, KYConsumer Support GE Appliances Website Schedule ServiceParts and Accessories Real Life Design Studio

JT91230, JT95230 specifications

The GE JT95230 and JT91230 are advanced jet engines designed by General Electric, renowned for their cutting-edge technologies and performance efficiencies. These engines are primarily utilized in the commercial aviation sector, equipping several popular aircraft models with the power and reliability needed for modern air travel.

One of the principal features of the GE JT95230 and JT91230 is their high thrust-to-weight ratio, which translates into improved aircraft performance and fuel efficiency. These engines are engineered with a focus on aerodynamic optimization, resulting in enhanced airflow and reduced drag. This design approach allows for superior fuel economy, ultimately contributing to lower operational costs for airlines.

The JT95230, a part of the GE80 series, incorporates a two-spool high bypass turbofan configuration. This configuration includes a large fan at the front, which significantly contributes to the engine's thrust. Meanwhile, the high bypass ratio allows the engine to operate at lower speeds, thereby reducing fuel consumption while maintaining high efficiency during various flight phases.

In contrast, the JT91230 features a more compact design, yet still retains robust performance capabilities. This engine is particularly noted for its durability and reliability, essential characteristics for commercial operators facing stringent safety and maintenance demands. The JT91230’s design also emphasizes noise reduction, aligning with modern regulations and environmental standards.

Technologically, both the JT95230 and JT91230 utilize advanced materials like titanium and composite structures, enhancing structural integrity while keeping weight to a minimum. Precise manufacturing techniques, including additive manufacturing, allow for greater accuracy and performance optimization in component production.

Another significant aspect is the incorporation of digital engine control systems, which enable real-time monitoring and adjustments of engine performance parameters. This technology enhances operational efficiency and allows for predictive maintenance, reducing downtime and increasing reliability. Furthermore, the engines are designed to be easily maintainable, ensuring that airline operators can quickly service and return them to operation.

Overall, the GE JT95230 and JT91230 embody a blend of advanced technology, efficiency, and reliability. Their innovative designs and features position them as leading choices for airlines looking to enhance their fleet performance, reduce fuel costs, and meet modern aviation regulations.