Using the self-cleaning oven, Before a Clean Cycle

Instructions

Using the self-cleaning oven.

The oven door must be closed and all controls must be set correctly for the cycle to work properly.

Operating Instructions Safety

Wipe up heavy soil on the oven bottom. (appearance may vary)

Before a Clean Cycle

We recommend venting your kitchen with an open window or using a ventilation fan or hood during

the first self-clean cycle.

Remove the broiler pan, broiler grid, probe, all cookware and any aluminum foil from the oven.

The oven shelves can be self-cleaned, but they will darken, lose their luster and become hard to slide.

Do not use abrasives or oven cleaners. Clean the top, sides and outside of the oven door with soap and water.

Make sure the oven light bulb cover is in place and the oven light is off.

IMPORTANT: The health of some birds is extremely sensitive to the fumes given off during the self-cleaning cycle of any oven. Move birds to another well-ventilated room.

■On double oven models, you can set a clean cycle in both ovens at the same time. The last oven set will automatically delay its start until the end of the first oven’s clean cycle.

■On double oven models, you can use timed baking in one oven and self-clean the other at the same time.

Consumer Support Troubleshooting Tips Care and Cleaning

How to Set the Oven for Cleaning

Press the SELF CLEAN STD/LOW pad once for a 4-hour clean time or twice for a 3-hour clean time.

A 3-hour self-clean time is recommended for use when cleaning small, contained spills. A self-clean time of 4 hours or longer is recommended for a dirtier oven.

If a time other than 4 hours or

3 hours is needed, use the number pads and enter the desired clean time.

You can change the clean time to any time between 3 hours and 5 hours, depending on how dirty your oven is.

Press the START pad.

The door locks automatically. The display will show the clean time remaining. It will not be possible to open the oven door until the temperature drops below the lock temperature and the LOCKED light goes off.

When the LOCKED light goes off, you will be able to open the door.

■The words LOCKED will flash and the oven control will signal if you set the clean cycle and forget to close the oven door.

■To stop a clean cycle, press the

CLEAR/OFF pad. When the LOCKED light goes off indicating the oven has cooled below the locking temperature, you will be able to open the door.

JT91230, JT95230 specifications

The GE JT95230 and JT91230 are advanced jet engines designed by General Electric, renowned for their cutting-edge technologies and performance efficiencies. These engines are primarily utilized in the commercial aviation sector, equipping several popular aircraft models with the power and reliability needed for modern air travel.

One of the principal features of the GE JT95230 and JT91230 is their high thrust-to-weight ratio, which translates into improved aircraft performance and fuel efficiency. These engines are engineered with a focus on aerodynamic optimization, resulting in enhanced airflow and reduced drag. This design approach allows for superior fuel economy, ultimately contributing to lower operational costs for airlines.

The JT95230, a part of the GE80 series, incorporates a two-spool high bypass turbofan configuration. This configuration includes a large fan at the front, which significantly contributes to the engine's thrust. Meanwhile, the high bypass ratio allows the engine to operate at lower speeds, thereby reducing fuel consumption while maintaining high efficiency during various flight phases.

In contrast, the JT91230 features a more compact design, yet still retains robust performance capabilities. This engine is particularly noted for its durability and reliability, essential characteristics for commercial operators facing stringent safety and maintenance demands. The JT91230’s design also emphasizes noise reduction, aligning with modern regulations and environmental standards.

Technologically, both the JT95230 and JT91230 utilize advanced materials like titanium and composite structures, enhancing structural integrity while keeping weight to a minimum. Precise manufacturing techniques, including additive manufacturing, allow for greater accuracy and performance optimization in component production.

Another significant aspect is the incorporation of digital engine control systems, which enable real-time monitoring and adjustments of engine performance parameters. This technology enhances operational efficiency and allows for predictive maintenance, reducing downtime and increasing reliability. Furthermore, the engines are designed to be easily maintainable, ensuring that airline operators can quickly service and return them to operation.

Overall, the GE JT95230 and JT91230 embody a blend of advanced technology, efficiency, and reliability. Their innovative designs and features position them as leading choices for airlines looking to enhance their fleet performance, reduce fuel costs, and meet modern aviation regulations.