GE 175D1807P633 installation instructions Soil Level, Spin Speed, Wash Temp, Start/Pause

Operating Instructions Safety Instructions

Installation Instructions

Consumer Support Troubleshooting Tips

Control settings.

3	Soil Level
	Changing the SOIL level increases or decreases the wash time to remove different amounts of soil.
	To change the SOIL level, press the SOIL level button until you have reached the desired setting.
	You can choose between Extra Light, Light, Normal, Heavy or Extra Heavy soil.

4	Spin Speed
	Changing the SPIN setting changes the final spin speed of the cycles. Always follow the garment
	manufacturer’s care label when changing the SPIN setting.
	To change the SPIN setting, press the SPIN setting button until you have reached the desired
	setting. You can choose between No Spin, Low, Medium, High or Extra High Spin. Higher spin
	speeds are not available on certain cycles, such as Delicates.
	Higher spin speeds remove more water from the clothes and will help reduce dry time, but may
	also increase the possibility of setting wrinkles on some fabrics.

5	Wash Temp
	Adjust to select the proper water temperature for the wash cycle. The rinse water is always cold
	to help reduce energy usage and reduce setting of stains and wrinkles.
	Follow the fabric manufacturer’s care label when selecting the wash temperature.
	To change the wash temperature, press the TEMP button until you have reached the desired
	setting. You can choose between Tap Cold, Cold, Warm, Hot or Sanitize. The Sanitized wash
	temperature is not available on certain cycles, such as Delicates.
	When selecting the Sanitize wash temperature, the washer increases the water temperature to
	sanitize and kill more than 99% of many common bacteria found in home laundry. The sanitize
	wash temperature is only available on the Whites/Heavy Duty wash cycle. For best results, select
	the heavy soil setting when using the Sanitize wash temperature setting.
6	Start/Pause
	Press to start a wash cycle. If the washer is running, pressing it once will pause the washer and

unlock the door. This function can be used to add garments during a cycle. Press again to restart the wash cycle.

NOTE: If the washer is paused and the cycle is not restarted within 15 minutes, the current wash cycle will be cancelled.

NOTE: In some cases the washer will drain first, then unlock the door when it is paused.

NOTE: The washer performs automatic system checks after pressing the START/PAUSE button. Water will flow in 45 seconds or less. You may hear the door lock and unlock before water flows; this is normal.

6