About the washer features, Troubleshooting Tips

About the washer features.

The Dispenser Drawer

Slowly open the dispenser drawer by pulling it out until it stops.

After adding laundry products, slowly close the dispenser drawer. Closing the drawer too quickly could result in early dispensing of the bleach, fabric softener or detergent.

You may see water in the bleach and fabric softener compartments at the end of the cycle. This is a result of the flushing/siphoning action and is part of the normal operation of the washer.

Use only HE High-Efficiency detergent.

Operating Instructions Safety Instructions

Installation

Instructions

Detergent Cup – Use for Liquid Detergent

Detergent Cavity – Use for Powder Detergent

The Detergent Compartment

■Only use high-efficiency detergent in this washer. Use the detergent manufacturer’s recommended amount. DO NOT fill above the MAX line.

The detergent compartment is in the left side of the dispenser drawer. The detergent cavity (cup removed) is used for powder detergent, and the detergent cup is used for liquid detergent.

■Powder Detergent – Remove the detergent cup and pour the suggested amount of powder detergent into the detergent cavity.

■Liquid Detergent – Leave the detergent cup in the drawer and pour liquid detergent into the cup. Do not fill above the MAX line.

■Add measured detergent to the left detergent compartment of the dispenser drawer.

■Detergent is flushed from the dispenser at the beginning of the wash cycle. Either powdered or liquid high- efficiency detergent can be used.

■Detergent usage may need to be adjusted for water temperature, water hardness, size and soil level of the load. Avoid using too much detergent in your washer since it can lead to oversudsing and detergent residue being left on the clothes.

Troubleshooting Tips

Liquid Bleach Compartment The Liquid Bleach Compartment

If desired, measure out the recommended amount of liquid bleach, not to exceed 1/3 cup (80 ml) and pour into the right compartment labeled “LIQUID BLEACH”

marked with this symbol .

It is recommended to use High-Efficiency (HE) bleach in this front-load washer.

Do not exceed the maximum fill line. Overfilling can cause early dispensing of the bleach which could result in damaged clothes.

NOTE: Do not use powdered bleach in the dispenser.

Consumer Support

Fabric Softener Compartment The Fabric Softener Compartment

If desired, pour the recommended amount of liquid fabric softener into the compartment labeled “FABRIC SOFTENER.”

Use only liquid fabric softener in the dispenser.

Dilute with water to the maximum fill line.

Do not exceed the maximum fill line. Overfilling can cause early dispensing of the fabric softener, which could stain clothes.

NOTE: Do not pour fabric softener directly on the wash load.

175D1807P633 specifications

The GE 175D1807P633 is a notable component within the realm of industrial automation and control systems, showcasing the ingenuity and advanced capabilities synonymous with General Electric. This specific model is recognized for its robustness and reliability, making it a go-to choice for industries that require precision and efficiency.

One of the main features of the GE 175D1807P633 is its compatibility with various industrial environments. Built to withstand challenging conditions, it excels in situations characterized by extreme temperatures and vibrations, enabling it to function seamlessly in manufacturing plants, energy sectors, and other demanding applications. This durability is crucial in minimizing downtime, ensuring that operations continue smoothly.

The GE 175D1807P633 incorporates cutting-edge technologies that enhance its performance. One of these key technologies is its advanced signal processing capabilities, which allow for greater accuracy and faster response times. This feature is particularly important in automation processes where timing is critical. Additionally, the unit often includes built-in diagnostics that offer real-time monitoring, enabling users to anticipate and address potential issues before they escalate into significant problems.

Another important characteristic of the GE 175D1807P633 is its user-friendly interface. Designed with operators in mind, it allows for straightforward integration with existing systems. This ease of integration is further supported by a variety of communication protocols, streamlining data exchange and enhancing collaboration among different components within an industrial setup.

The versatility of the GE 175D1807P633 is another highlight, as it can be utilized in numerous applications ranging from process automation to discrete manufacturing. Its adaptability makes it suitable for a variety of industries, including automotive, pharmaceuticals, and food processing.

Furthermore, this model is designed with energy efficiency in mind, aligning with modern sustainability goals. Its operational efficiency not only reduces energy consumption but also translates into cost savings for companies that deploy it.

In conclusion, the GE 175D1807P633 stands out as a powerful, adaptable, and efficient component in the industrial automation landscape. With features that enhance performance and reliability, it exemplifies GE’s commitment to innovation and excellence in engineering, making it a preferred choice for industries striving for optimized operational efficiency.