Location of Your Washer, Contractor Dimensions

Installation Instructions

LOCATION OF YOUR WASHER

Do Not Install the Washer:

1.In an area exposed to dripping water or outside weather conditions. The ambient temperature should never be below 60°F (15.6°C) for proper washer operation.

2.In an area where it will come in contact with curtains or drapes.

3.On carpet . The floor MUST be a hard surface with a maximum slope of 1/2″ per foot (1.27 cm per

30 cm). To make sure the washer does not vibrate or move, you may have to reinforce the floor.

NOTE: If floor is in poor condition, use 3/4″ impregnated plywood sheet solidly attached to existing floor covering.

IMPORTANT:

Minimum Installation Clearances

•When installed in alcove: Sides, Rear, Top = 0″ (0 cm)

•When installed in closet: Sides, Rear, Top = 0″ (0 cm), Front = 1″ (2.54 cm)

•Closet door ventilation openings required:

2 louvers each 60 square in. (387 cm2), located 3″ (7.6 cm) from top and bottom of door

CONTRACTOR DIMENSIONS

BACK

21”

(533 mm) 6.25”

(159 mm)

4” (102 mm)

29.75”

(756 mm)

27.75”

(705 mm)

ROUGH-IN DIMENSIONS

FRONT

23.5”

(597 mm)

SIDE

26.6”

(676.5 mm)

*NOTE:

Washer legs have 0.75” (19 mm) adjustability. Stacked: 67.7” (171.8 cm)

33.4”*

(849 mm)

33.4”*

(849 mm)

175D1807P633 specifications

The GE 175D1807P633 is a notable component within the realm of industrial automation and control systems, showcasing the ingenuity and advanced capabilities synonymous with General Electric. This specific model is recognized for its robustness and reliability, making it a go-to choice for industries that require precision and efficiency.

One of the main features of the GE 175D1807P633 is its compatibility with various industrial environments. Built to withstand challenging conditions, it excels in situations characterized by extreme temperatures and vibrations, enabling it to function seamlessly in manufacturing plants, energy sectors, and other demanding applications. This durability is crucial in minimizing downtime, ensuring that operations continue smoothly.

The GE 175D1807P633 incorporates cutting-edge technologies that enhance its performance. One of these key technologies is its advanced signal processing capabilities, which allow for greater accuracy and faster response times. This feature is particularly important in automation processes where timing is critical. Additionally, the unit often includes built-in diagnostics that offer real-time monitoring, enabling users to anticipate and address potential issues before they escalate into significant problems.

Another important characteristic of the GE 175D1807P633 is its user-friendly interface. Designed with operators in mind, it allows for straightforward integration with existing systems. This ease of integration is further supported by a variety of communication protocols, streamlining data exchange and enhancing collaboration among different components within an industrial setup.

The versatility of the GE 175D1807P633 is another highlight, as it can be utilized in numerous applications ranging from process automation to discrete manufacturing. Its adaptability makes it suitable for a variety of industries, including automotive, pharmaceuticals, and food processing.

Furthermore, this model is designed with energy efficiency in mind, aligning with modern sustainability goals. Its operational efficiency not only reduces energy consumption but also translates into cost savings for companies that deploy it.

In conclusion, the GE 175D1807P633 stands out as a powerful, adaptable, and efficient component in the industrial automation landscape. With features that enhance performance and reliability, it exemplifies GE’s commitment to innovation and excellence in engineering, making it a preferred choice for industries striving for optimized operational efficiency.