GE 165D4700P381 owner manual Caring for the dishwasher

Page 15

Caring for the dishwasher.

ge.com

Cleaning the Exterior Door Panel

 

Safety

Before cleaning the front panel, make

sure you know what type of panel you have. Refer to the last two letters of your model number. You can locate your model number on the left-hand tub wall just inside the door. If your model number ends with BB, CC, WW, SA or BG, then you have a Painted Door panel. If your model number ends with SS, then you have a Stainless Steel Door panel. If your model number ends with CS, then you have a CleanSteel panel.

Follow the instructions below for cleaning the door panel for your specific model.

Painted Door Panel (model numbers ending in BB–black, CC–bisque, WW–White, SA–silver metallic or BG–graphite black)

Use a clean, soft, lightly dampened cloth, then dry thoroughly. You may also use a good appliance wax or polish.

Stainless Steel Door Panel (model numbers

ending in SS)

The stainless steel panels can be cleaned with Stainless Steel Magic or a similar product using a clean, soft cloth. Do not use appliance wax, polish, bleach or products containing chlorine on Stainless Steel doors.

You can order Stainless Steel Magic #WX10X15 through GE Parts by calling 800.626.2002.

CleanSteel Door Panel (model numbers ending in CS)

Use a clean, soft, lightly dampened cloth, then dry thoroughly. Do not use appliance wax, polish or any chemical agent on CleanSteel doors.

Do not wipe the dishwasher with a soiled dish cloth or wet towel. These may leave a residue. Do not use scouring pads or powdered cleaners because these products can scratch the finish.

Instructions

Operating Instructions

Stainless Steel Interior—Tub and Inner Door

The stainless steel used to make the dishwasher tub and inner door provides the highest reliability available in a GE dishwasher. If the dishwasher tub or inner door should be scratched or dented during normal use, they will not rust or corrode. These surface blemishes will not affect their function or durability.

Cleaning the Control Panel

To clean the control panel, use a lightly dampened cloth. Then dry thoroughly.

Protect Against Freezing

Troubleshooting Tips

If your dishwasher is left in an unheated place during the winter, ask a service technician to:

1Cut off electrical power to the dishwasher. Remove fuses or trip circuit breaker.

2Turn off the water supply and disconnect the water inlet line from the water valve.

3Drain water from the water inlet line and water valve. (Use a pan to catch the water.)

4Reconnect the water inlet line to the water valve.

Consumer

Air gap

Check the air gap any time your dishwasher isn’t draining well.

Does Your Dishwasher Have an Air Gap?

An air gap protects your dishwasher

The air gap is easy to clean.

against water backing up into it if a drain

 

Turn off the dishwasher and lift off the

clogs. The air gap is not a part of the

1

dishwasher. It is not covered by your

 

cover.

 

 

 

warranty. Not all plumbing codes require

 

Remove the plastic cap and clean with

2

air gaps, so you may not have one.

 

a toothpick.

 

Support

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents You can find them on the tub wall just inside the door Write the model and serial numbers here Model # Serial #Consumer Support Troubleshooting TipsReboot Operating InstructionsGe.com SupportAbout the dishwasher control panel Control SettingsSafety Instructions Troubleshooting Tips Consumer SupportEstablishments Heavy 8.8 gal., 105 minMedium 7.5 gal., 95 min Light 6.3 gal., 85 minEnhancements StartFront-Control Dishwashers Recommended dishwasher products CleanStatus Indicator Lights What It Means Flashing display lightsDish Preparation Prior to Loading Using the dishwasherCheck the Water Temperature Use Jet-Dryor Cascade Crystal Clear Rinse AgentFilling Manual Detergent Dispenser SafetyManual Detergent Dispenser InstructionsSmartDispense SmartDispenseTM Detergent Dispenser some modelsTop controls Determine the Hardness of Your Tap WaterCalibrationofModelsWithouta3-DigitDisplay Front controlsUpper Rack Troubleshooting Tips SupportAdjustable Upper Rack Loading the dishwasher racksThen fill the lower rack and begin your cycle SafetyRemoving the Upper Rack Silverware BasketExtra Rack Features on some models Loading place settings…Caring for the dishwasher Problem Possible Causes What To Do Before you call for service…Safety Instructions Operating Instructions Error Messages Possible Causes What To DoMake sure inlet water temperature is at least 120F Flatware Make sure water temperature is at least 120FCycle that will get them clean This could be etching. Lower the water heater temperatureWater won’t pump Go off when you’reSetting controls Water standing Control panel lightsGE Dishwasher Warranty For The Period GE Will ReplaceWarrantor General Electric Company. Louisville, KY Consumer Support Lave-vaisselle Conseils de dépannage Instructions de FonctionnementEn ce sens, voyez les recommandations du fabricant Conseils de dépannage Soutien auAvant de jeter votre vieux lave-vaisselle Soutien au consommateur Conseils de dépannage Le panneau de contrôle du lave-vaisselleRéglage des contrôles Instructions de sécuritéProgrammes de lavage sélections Conseils de dépannage Soutien au consommateurRinse and Hold rinçage et attente START/RESET mise en marche/remise à zéroOptions Et attenteMise en marche Produits de lavage de vaisselle recommandésVoyants lumineux qui clignotent Au consommateurVous avez oublié de la vaisselle? Utilisation du lave-vaisselleVérifiez la température de l’eau Préparation de la vaisselle avant son chargementRemplissage du distributeur manuel Distributeur manuel de détergentDe sécurité De dépannage Soutien au consommateurDistributeur de détergent SmartDispenseMD certains modèles Prenez soin de ne pas mélanger un détergentUn distributeur plein dure environ 1 mois d’usage normal Après avoir réglé la dureté de l’eau, appuyez sur Commandes sur le hautInstructions Trouvez la dureté de votre eau d’alimentationPanier supérieur ajustable Chargement des paniers de votre lave-vaisselleSécurité Panier supérieurConsommateur Enlèvement du panier supérieurPanier à argenterie Chargement des couverts… Chargement des paniers du lave-vaisselleSoutien Soins de votre lave-vaisselleAvant d’appeler le service de réparations… Causes possibles Ce qu’il faut faireProblème Causes possibles Ce qu’il faut faire Du distributeur Eau dans le Voile sur les verresDétergent qui reste Dans les réservoirsDe la cuve EnréglantlescommandesLe lave-vaisselle Ne fonctionne pasCe qui n’est pas couvert Garantie GE sur les lave-vaisselleInstructions de sécurité Fonctionnement Pour une période de GE remplaceraProlongation de garantie Soutien au consommateur Service de réparationsPièces et accessoires Studio de conception réaliste

165D4700P381 specifications

The GE 165D4700P381 is a notable component in the field of electrical engineering, primarily recognized for its application in various industries that require reliable and efficient electrical power management. This product serves as a key element in power distribution systems, ensuring stable performance and effective load management.

One of the main features of the GE 165D4700P381 is its robust design. Engineered to withstand harsh environmental conditions, this device is built with high-quality materials that offer durability and longevity. It is suited for both indoor and outdoor applications, making it a versatile solution for different settings.

The technology embedded within the GE 165D4700P381 reflects the latest advancements in power management systems. It is designed to operate efficiently in a range of temperatures and humidity levels, ensuring optimal functionality regardless of the surrounding environment. This adaptability is critical for industries that face fluctuating conditions, allowing for uninterrupted service.

The GE 165D4700P381 also features integrated protective mechanisms that enhance its safety. With built-in fault detection and prevention systems, it minimizes the risk of electrical failures, thereby protecting connected devices and reducing maintenance costs. These safety features are crucial for applications in sectors such as manufacturing, utilities, and telecommunications, where system reliability is paramount.

Additionally, the GE 165D4700P381 is equipped with advanced connectivity options. This enables seamless integration with smart grid technologies and IoT devices, facilitating real-time monitoring and management of electrical power systems. The ability to connect with digital infrastructure supports enhanced data analytics, allowing businesses to optimize their energy consumption and improve operational efficiency.

Overall, the GE 165D4700P381 stands out as a dependable solution for those seeking to enhance their power management capabilities. Its combination of robust construction, advanced technology, and safety features makes it an ideal choice for various industrial applications. As energy demands grow and systems evolve, the GE 165D4700P381 continues to play a vital role in ensuring reliable electrical performance across multiple platforms.
Top Page Image Contents