GE 165D4700P381 Heavy 8.8 gal., 105 min, Medium 7.5 gal., 95 min, Light 6.3 gal., 85 min, Cycle

Page 5

ge.com

3Wash Programs (Selections) (continued)

 

 

ANTI-BACTERIA

Heavy 8.8 gal., 105 min.

 

 

 

Medium 7.5 gal., 95 min.

 

 

 

Light 6.3 gal., 85 min.

 

 

 

This cycle raises the water temperature in the final rinse to sanitize your dishware.

 

 

 

The cycle length will vary depending on the temperature of your inlet water.

 

 

 

NOTE: The Anti-Bacteria cycle is monitored for sanitization requirements. If the cycle is

 

 

 

interrupted during or after the main wash portion or if the incoming water temperature

 

 

 

is so low that adequate water heating cannot be achieved, the sanitizing conditions may

 

 

 

not be met. In these cases, the sanitized light will not illuminate at the end of the cycle.

 

 

 

NOTE: NSF-certified residential dishwashers are not intended for licensed food

 

 

 

establishments.

 

 

DEEP CLEAN

9.6 gal., 111 min.

(on some models)

This cycle is meant for heavily soiled dishes or cookware with dried-on or baked-on soils.

 

 

 

This cycle may not remove burned-on foods. Everyday dishes are safe to be used in this

 

 

 

cycle.

 

 

 

NOTE: On some models, the STEAM PRE-WASHenhancement will be automatically

 

 

 

selected when the DEEP CLEAN cycle is chosen, and cannot be de-selected.

 

 

COOKWARE/

Heavy 10.0 gal., 80 min.

 

 

POTS & PANS

Medium 8.8 gal., 70 min.

(on some models)

Light 7.5 gal., 60 min.

 

 

 

This cycle is meant for heavily soiled dishes or cookware with dried-on or baked-on soils.

 

 

 

This cycle may not remove burned-on foods. Everyday dishes are safe to be used in

 

 

 

this cycle.

 

 

 

 

 

NORMAL WASH 5.0–8.8 gal., 47–90 min.

 

 

 

This cycle is for medium/heavily soiled dishes and glassware.

 

 

 

Cycle time and water usage are approximate values. Results will depend on

 

 

 

several factors, including but not limited to inlet temperature, household water

 

 

 

pressure and amount of soil in the wash water.

 

 

SPEED CYCLE

7.5 gal., 35 min.

(on some models)

This cycle is for everyday dishes and glassware.

 

 

 

 

 

 

HAND/GENTLE

7.5 gal., 35 min.

(CHINA CRYSTAL)

This cycle is for lightly soiled china and crystal.

 

 

 

 

 

 

GLASSES

7.5 gal., 30 min.

(on some models)

This cycle is specifically designed for glasses.

 

 

 

 

PLASTICS CYCLE

Heavy 8.8 gal., 120 min.

(on some models)

Medium 7.5 gal., 105 min.

 

 

 

Light 5.0 gal., 90 min.

 

 

 

The longer time for this cycle includes a built-in drying portion that is specifically

 

 

 

designed to reduce the risk of melting plastic items and improve plastic drying.

 

 

 

For removing red tomato-based stains, GE recommends the use of Cascade®

 

 

 

Plastic BoosterTM.

 

TOP RACK ONLY

Heavy 8.2 gal., 70 min.

(on some models)

Medium 7.0 gal., 60 min.

 

 

 

Light 4.6 gal., 50 min.

 

 

 

This cycle washes lightly soiled dishes on the upper rack only.

 

 

 

RINSE AND HOLD

2.5 gal., 10 min.

 

 

(RINSE ONLY)

For rinsing partial loads that will be washed later. Do not use detergent with this cycle.

NOTE: On some models, the HAND/GENTLE and PLASTICS selector is a toggle pad; push pad to switch between HAND/GENTLE and PLASTICS.

NOTE: This dishwasher is equipped with CleanSensorTM with automatic temperature control; therefore, cycle length and time may vary depending on soil and water temperature conditions.

NOTE: Only the Anti-Bacteria cycle has been designed to meet the requirements of Section 6, NSF 184 for soil removal and sanitization efficacy.

5

Safety Instructions

Operating Instructions

Troubleshooting Tips

Consumer Support

Image 5
Contents You can find them on the tub wall just inside the door Write the model and serial numbers here Model # Serial #Reboot Troubleshooting TipsOperating Instructions Consumer SupportGe.com SupportSafety Instructions Control SettingsTroubleshooting Tips Consumer Support About the dishwasher control panelMedium 7.5 gal., 95 min Heavy 8.8 gal., 105 minLight 6.3 gal., 85 min EstablishmentsFront-Control Dishwashers EnhancementsStart Status Indicator Lights What It Means CleanFlashing display lights Recommended dishwasher productsCheck the Water Temperature Using the dishwasherUse Jet-Dryor Cascade Crystal Clear Rinse Agent Dish Preparation Prior to LoadingManual Detergent Dispenser SafetyInstructions Filling Manual Detergent DispenserSmartDispense SmartDispenseTM Detergent Dispenser some modelsCalibrationofModelsWithouta3-DigitDisplay Determine the Hardness of Your Tap WaterFront controls Top controlsAdjustable Upper Rack Troubleshooting Tips SupportLoading the dishwasher racks Upper RackRemoving the Upper Rack SafetySilverware Basket Then fill the lower rack and begin your cycleExtra Rack Features on some models Loading place settings…Caring for the dishwasher Safety Instructions Operating Instructions Before you call for service…Error Messages Possible Causes What To Do Problem Possible Causes What To DoCycle that will get them clean Flatware Make sure water temperature is at least 120FThis could be etching. Lower the water heater temperature Make sure inlet water temperature is at least 120FSetting controls Water standing Go off when you’reControl panel lights Water won’t pumpWarrantor General Electric Company. Louisville, KY GE Dishwasher WarrantyFor The Period GE Will Replace Consumer Support Lave-vaisselle Conseils de dépannage Instructions de FonctionnementAvant de jeter votre vieux lave-vaisselle En ce sens, voyez les recommandations du fabricantConseils de dépannage Soutien au Réglage des contrôles Le panneau de contrôle du lave-vaisselleInstructions de sécurité Soutien au consommateur Conseils de dépannageProgrammes de lavage sélections Conseils de dépannage Soutien au consommateurOptions START/RESET mise en marche/remise à zéroEt attente Rinse and Hold rinçage et attenteVoyants lumineux qui clignotent Produits de lavage de vaisselle recommandésAu consommateur Mise en marcheVérifiez la température de l’eau Utilisation du lave-vaissellePréparation de la vaisselle avant son chargement Vous avez oublié de la vaisselle?De sécurité Distributeur manuel de détergentDe dépannage Soutien au consommateur Remplissage du distributeur manuelUn distributeur plein dure environ 1 mois d’usage normal Distributeur de détergent SmartDispenseMD certains modèlesPrenez soin de ne pas mélanger un détergent Instructions Commandes sur le hautTrouvez la dureté de votre eau d’alimentation Après avoir réglé la dureté de l’eau, appuyez surSécurité Chargement des paniers de votre lave-vaissellePanier supérieur Panier supérieur ajustablePanier à argenterie ConsommateurEnlèvement du panier supérieur Chargement des couverts… Chargement des paniers du lave-vaisselleSoutien Soins de votre lave-vaisselleProblème Causes possibles Ce qu’il faut faire Avant d’appeler le service de réparations…Causes possibles Ce qu’il faut faire Détergent qui reste Voile sur les verresDans les réservoirs Du distributeur Eau dans leLe lave-vaisselle EnréglantlescommandesNe fonctionne pas De la cuveInstructions de sécurité Fonctionnement Garantie GE sur les lave-vaissellePour une période de GE remplacera Ce qui n’est pas couvertPièces et accessoires Soutien au consommateur Service de réparationsStudio de conception réaliste Prolongation de garantie

165D4700P381 specifications

The GE 165D4700P381 is a notable component in the field of electrical engineering, primarily recognized for its application in various industries that require reliable and efficient electrical power management. This product serves as a key element in power distribution systems, ensuring stable performance and effective load management.

One of the main features of the GE 165D4700P381 is its robust design. Engineered to withstand harsh environmental conditions, this device is built with high-quality materials that offer durability and longevity. It is suited for both indoor and outdoor applications, making it a versatile solution for different settings.

The technology embedded within the GE 165D4700P381 reflects the latest advancements in power management systems. It is designed to operate efficiently in a range of temperatures and humidity levels, ensuring optimal functionality regardless of the surrounding environment. This adaptability is critical for industries that face fluctuating conditions, allowing for uninterrupted service.

The GE 165D4700P381 also features integrated protective mechanisms that enhance its safety. With built-in fault detection and prevention systems, it minimizes the risk of electrical failures, thereby protecting connected devices and reducing maintenance costs. These safety features are crucial for applications in sectors such as manufacturing, utilities, and telecommunications, where system reliability is paramount.

Additionally, the GE 165D4700P381 is equipped with advanced connectivity options. This enables seamless integration with smart grid technologies and IoT devices, facilitating real-time monitoring and management of electrical power systems. The ability to connect with digital infrastructure supports enhanced data analytics, allowing businesses to optimize their energy consumption and improve operational efficiency.

Overall, the GE 165D4700P381 stands out as a dependable solution for those seeking to enhance their power management capabilities. Its combination of robust construction, advanced technology, and safety features makes it an ideal choice for various industrial applications. As energy demands grow and systems evolve, the GE 165D4700P381 continues to play a vital role in ensuring reliable electrical performance across multiple platforms.