GE 165D4700P381 Operating Instructions, Troubleshooting Tips, Consumer Support, Reboot

Page 2

Safety Instructions

Operating Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING —

SAVE THESE INSTRUCTIONS

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, and to prevent property damage, personal injury, or death.

WARNING! WATER HEATER SAFETY

Under certain conditions, hydrogen gas may be produced in a water heater that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE.

If the hot water has not been used for two weeks or more, prevent the possibility of damage or injury by turning on all hot water faucets and allow them to run for several minutes. Do this before using any electrical appliance which is connected to the hot water system. This simple procedure will allow any built- up hydrogen gas to escape. Since the gas is flammable, do not smoke or use an open flame or appliance during this process.

PROPER INSTALLATION AND MAINTENANCE

This dishwasher must be properly installed and located in accordance with the Installation Instructions before it is used. If you did not receive an Installation Instructions sheet with your dishwasher, you can receive one by visiting our website at ge.com.

Troubleshooting Tips

■Connect to a grounded metal, permanent wiring system; or run an equipment-grounding conductor with the circuit conductors and connect to the equipment-grounding terminal or lead of the appliance.

■Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative if you are in doubt whether the appliance is properly grounded.

■Dispose of discarded appliances and shipping or packing material properly.

■Do not attempt to repair or replace any part of your dishwasher unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.

■To minimize the possibility of electric shock, disconnect this appliance from the power supply before attempting any maintenance.

NOTE: Turning the dishwasher off does not disconnect the appliance from the power supply. We recommend having a qualified technician service your appliance.

CAUTION: To prevent minor injury or property damage

Consumer Support

■Contents washed in Anti-bacterial mode, if

available, may be hot to the touch. Use care before handling.

■Using a detergent that is not specifically designed for dishwashers will cause the dishwasher to fill with suds.

■If your dishwasher is connected to a wall switch, ensure that the switch is on prior to use.

 

■On dishwashers with electronic

 

controls, if you choose to turn the wall

 

switch off between wash cycles, allow

 

5–10 seconds after turning the switch on before

2

touching START/RESET to allow the control to

reboot.

■Non-Dishware Items: Do not wash items such as electronic air cleaner filters, furnace filters and paint brushes in your dishwasher. Damage to dishwasher and discoloration or staining of dishwasher may result.

■Close supervision is necessary if this appliance is used by or near children.

■Load light, plastic items so they will not become dislodged and drop to the bottom of the dishwasher—they might come into contact with the heating element and be damaged.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Write the model and serial numbers here Model # Serial # You can find them on the tub wall just inside the doorOperating Instructions Troubleshooting TipsReboot Consumer SupportSupport Ge.comTroubleshooting Tips Consumer Support Control SettingsSafety Instructions About the dishwasher control panelLight 6.3 gal., 85 min Heavy 8.8 gal., 105 minMedium 7.5 gal., 95 min EstablishmentsFront-Control Dishwashers EnhancementsStart Flashing display lights CleanStatus Indicator Lights What It Means Recommended dishwasher productsUse Jet-Dryor Cascade Crystal Clear Rinse Agent Using the dishwasherCheck the Water Temperature Dish Preparation Prior to LoadingInstructions SafetyManual Detergent Dispenser Filling Manual Detergent DispenserSmartDispenseTM Detergent Dispenser some models SmartDispenseFront controls Determine the Hardness of Your Tap WaterCalibrationofModelsWithouta3-DigitDisplay Top controlsLoading the dishwasher racks Troubleshooting Tips SupportAdjustable Upper Rack Upper RackSilverware Basket SafetyRemoving the Upper Rack Then fill the lower rack and begin your cycleLoading place settings… Extra Rack Features on some modelsCaring for the dishwasher Error Messages Possible Causes What To Do Before you call for service…Safety Instructions Operating Instructions Problem Possible Causes What To DoThis could be etching. Lower the water heater temperature Flatware Make sure water temperature is at least 120FCycle that will get them clean Make sure inlet water temperature is at least 120FControl panel lights Go off when you’reSetting controls Water standing Water won’t pumpWarrantor General Electric Company. Louisville, KY GE Dishwasher WarrantyFor The Period GE Will Replace Consumer Support Lave-vaisselle Instructions de Fonctionnement Conseils de dépannageAvant de jeter votre vieux lave-vaisselle En ce sens, voyez les recommandations du fabricantConseils de dépannage Soutien au Instructions de sécurité Le panneau de contrôle du lave-vaisselleRéglage des contrôles Soutien au consommateur Conseils de dépannageConseils de dépannage Soutien au consommateur Programmes de lavage sélectionsEt attente START/RESET mise en marche/remise à zéroOptions Rinse and Hold rinçage et attenteAu consommateur Produits de lavage de vaisselle recommandésVoyants lumineux qui clignotent Mise en marchePréparation de la vaisselle avant son chargement Utilisation du lave-vaisselleVérifiez la température de l’eau Vous avez oublié de la vaisselle?De dépannage Soutien au consommateur Distributeur manuel de détergentDe sécurité Remplissage du distributeur manuelUn distributeur plein dure environ 1 mois d’usage normal Distributeur de détergent SmartDispenseMD certains modèlesPrenez soin de ne pas mélanger un détergent Trouvez la dureté de votre eau d’alimentation Commandes sur le hautInstructions Après avoir réglé la dureté de l’eau, appuyez surPanier supérieur Chargement des paniers de votre lave-vaisselleSécurité Panier supérieur ajustablePanier à argenterie ConsommateurEnlèvement du panier supérieur Chargement des paniers du lave-vaisselle Chargement des couverts…Soins de votre lave-vaisselle SoutienProblème Causes possibles Ce qu’il faut faire Avant d’appeler le service de réparations…Causes possibles Ce qu’il faut faire Dans les réservoirs Voile sur les verresDétergent qui reste Du distributeur Eau dans leNe fonctionne pas EnréglantlescommandesLe lave-vaisselle De la cuvePour une période de GE remplacera Garantie GE sur les lave-vaisselleInstructions de sécurité Fonctionnement Ce qui n’est pas couvertStudio de conception réaliste Soutien au consommateur Service de réparationsPièces et accessoires Prolongation de garantie

165D4700P381 specifications

The GE 165D4700P381 is a notable component in the field of electrical engineering, primarily recognized for its application in various industries that require reliable and efficient electrical power management. This product serves as a key element in power distribution systems, ensuring stable performance and effective load management.

One of the main features of the GE 165D4700P381 is its robust design. Engineered to withstand harsh environmental conditions, this device is built with high-quality materials that offer durability and longevity. It is suited for both indoor and outdoor applications, making it a versatile solution for different settings.

The technology embedded within the GE 165D4700P381 reflects the latest advancements in power management systems. It is designed to operate efficiently in a range of temperatures and humidity levels, ensuring optimal functionality regardless of the surrounding environment. This adaptability is critical for industries that face fluctuating conditions, allowing for uninterrupted service.

The GE 165D4700P381 also features integrated protective mechanisms that enhance its safety. With built-in fault detection and prevention systems, it minimizes the risk of electrical failures, thereby protecting connected devices and reducing maintenance costs. These safety features are crucial for applications in sectors such as manufacturing, utilities, and telecommunications, where system reliability is paramount.

Additionally, the GE 165D4700P381 is equipped with advanced connectivity options. This enables seamless integration with smart grid technologies and IoT devices, facilitating real-time monitoring and management of electrical power systems. The ability to connect with digital infrastructure supports enhanced data analytics, allowing businesses to optimize their energy consumption and improve operational efficiency.

Overall, the GE 165D4700P381 stands out as a dependable solution for those seeking to enhance their power management capabilities. Its combination of robust construction, advanced technology, and safety features makes it an ideal choice for various industrial applications. As energy demands grow and systems evolve, the GE 165D4700P381 continues to play a vital role in ensuring reliable electrical performance across multiple platforms.
Top Page Image Contents