Receiving, Unpacking, Handling, Storage

Receiving

Upon receiving the product, check to make sure all items are accounted for by referencing the bill of lading to ensure all items were received. Inspect each crate for shipping damage before accepting delivery. Notify the carrier if any damage is noticed. The carrier will make notification on the delivery receipt acknowledging any damage to the product. All damage should be noted on all the copies of the bill of lading which is countersigned by the delivering carrier. A Carrier Inspection Report should be filled out by the carrier upon arrival and the Traffic Department. If damaged upon arrival, file claim with carrier. Any physical damage to the unit after acceptance is not the responsibility of Greenheck Fan Corporation.

Unpacking

Verify that all required parts and the correct quantity of each item have been received. If any items are missing report shortages to your local representative to arrange for obtaining missing parts. Sometimes it is not possible that all items for the unit be shipped together due to availability of transportation and truck space. Confirmation of shipment(s) must be limited to only items on the bill of lading.

Handling

Units are to be rigged and moved by the lifting brackets provided or by the skid when a forklift is used. Location of brackets varies by model and size. Handle each piece in such a manner as to keep from scratching or chipping the coating. Damaged finish may reduce ability of the unit to resist corrosion.

Storage

Units are protected against damage during shipment. If the unit cannot be installed and operated immediately, precautions need to be taken to prevent deterioration of the unit during storage. The user assumes responsibility of the unit and accessories while in storage. The manufacturer will not be responsible for damage during storage. These suggestions are provided solely as a convenience to the user.

Inspection and Maintenance during Storage

While in storage, inspect units once per month. Keep a record of inspection and maintenance performed

If moisture or dirt accumulations are found on parts, the source should be located and eliminated. At each inspection, rotate all moving components by hand ten to fifteen revolutions to distribute lubricant on motor and bearings. If paint deterioration begins, consideration should be given to touch-up or repainting. Units with special coatings may require special techniques for touch-up or repair.

Machined parts coated with rust preventive should be restored to good condition promptly if signs of rust occur. Immediately remove the original rust preventive coating with petroleum solvent and clean with lint-free cloths. Polish any remaining rust from surface with crocus cloth or fine emery paper and oil. Do not destroy the continuity of the surfaces. Wipe clean thoroughly with Tectyl® 506 (Ashland Inc.) or the equivalent. For hard to reach internal surfaces or for occasional use, consider using Tectyl® 511M Rust Preventive or WD-40®or the equivalent.

2Model ERV Energy Recovery Unit

ERV-361, ERV-251, ERV-521, ERV-582, ERV-522 specifications

Greenheck Fan has established itself as a leader in the design and manufacturing of high-performance ventilation systems, including its innovative energy recovery ventilators (ERVs). Among their popular models are the ERV-581, ERV-522, ERV-582, ERV-521, and ERV-251, each designed to enhance indoor air quality while optimizing energy efficiency.

The ERV-581 offers comprehensive ventilation solutions for commercial buildings, equipped with advanced heat recovery technology. This model features a robust, compact design, allowing for easy installation in limited spaces. Its efficient energy recovery capabilities transfer heat and moisture between incoming and outgoing airstreams, leading to significant reductions in heating and cooling costs. The ERV-581 also includes a user-friendly control panel for simplified operation.

Next in line, the ERV-522 is engineered for larger spaces, balancing higher airflow rates with enhanced energy recovery performance. This model is particularly beneficial for schools and office buildings, where maintaining fresh air quality is paramount. The ERV-522 employs a two-stage filtration system, ensuring that airborne pollutants are effectively captured before being circulated back into the environment. Its resilient construction further ensures longevity and durability in demanding applications.

The ERV-582 enhances the lineup with its dual-function capability, serving both as an energy recovery ventilator and a dehumidification system. This flexibility makes it an ideal choice for climates with high humidity levels, where moisture control is essential. The ERV-582 incorporates Greenheck’s patented technology for optimal performance under varying temperature and humidity conditions, making it a versatile solution for diverse environments.

The ERV-521 stands out with its eco-friendly design, featuring recyclable components that align with sustainable building practices. This model is particularly favored in LEED-certified projects, where energy efficiency and minimal environmental impact are essential. The ERV-521 also includes an intelligent control system that adjusts airflow rates based on occupancy levels, ensuring optimal energy usage.

Finally, the ERV-251 is a compact, energy-efficient model suited for residential installations. It is designed to fit seamlessly into homes, providing essential ventilation while reducing energy consumption. The user-friendly interface allows homeowners to monitor and adjust settings easily, making the ERV-251 a popular choice for those looking to improve indoor air quality without compromising on comfort.

Together, these Greenheck ERV models exemplify cutting-edge technologies and engineering, paving the way for healthier indoor environments while promoting energy conservation. Each unit is tailored to meet specific application needs, making them invaluable assets for any ventilation strategy.