Fisher & Paykel OR30SDBMX manual Wrong, Choice of Burner fig, Correct USE of Dual Burner .6a 2.6b

2

Fig. 2.5

WRONG

Fig. 2.6a

CORRECT

Fig. 2.6b

CHOICE OF BURNER (fig. 2.5)

The symbols or wordings printed on the panel above the gas dials indicate the corre- spondence between the dial and the burner.

The most suitable burner is to be chosen according to the diameter and volume capacity of the container to be warmed.

It is important that the diameter of the pots or pans suitably match the heating potential of the burners in order not to jeopardise the efficiency of the burners, bringing about a waste of gas fuel.

A small diameter pot or pan placed on a large burner does not necessarily mean that boiling conditions are reached quicker.

DIAMETERS OF PANS WHICH MAY BE USED ON THE HOB BURNERS

BURNER	MINIMUM	MAX.
Semi-rapid	16 cm (6” 19/64)	24 cm (9” 7/16)
Dual	26 cm (10” 3/16)	28 cm (11” 1/16)

Wok pans min 36 cm (14” 3/16) - max 40 cm (15” 3/4)

Do not use pans with concave or convex bases

CORRECT USE OF DUAL BURNER (Fig. 2.6a - 2.6b)

The flat-bottomed pans are to be placed directly onto the pan-support.

When using a WOK you need to place the supplied wok support on the pan supports for the burner to avoid any faulty operation of the Dual burner (Figs. 2.6a - 2.6b).

IMPORTANT:

The special support for wok pans (fig. 2.6b) MUST BE PLACED ONLY over the pan-rest for the Dual burner.

14

Ensure that the handles of cookware do not stick out over the edge of the range, to avoid them being knocked over by accident. This also makes it more difficult for children to reach the cooking vessels.