5
FITTING THE SIDE RACKS
1.Place the side racks in oven. Make sure that they are the right way up, as in the illustration, and then insert and tighten the front and rear fixing screws.
2.If not already fitted, fit the telescopic sliding shelf supports. See “Fitting and removing the sliding shelf supports.
Note: Do not use the first step from the top.
REMOVING THE SIDE RACKS
3. Using a small coin or a
4. Remove the side rack.
FITTING AND REMOVING THE SLIDING SHELF SUPPORTS
When fitting the sliding shelf supports, make sure that you fit:
-the side racks the slides to the top wire of a shelf position
-both sides of each pair of slides both slides on the same level.
Important!
Do not use on shelf position 1 or 2.
Remove the side racks first to make removing the sliding shelf supports easier.
24
1
2
1