Thermador PH42GS, PH54GS, PH48HS, PH48GS, PH36HS Before You Begin, Safety Codes and Standards

Page 3

Safety

IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

APPROVED FOR ALL RESIDENTIAL APPLIANCES FOR RESIDENTIAL USE ONLY

Before You Begin

IMPORTANT: Save these Instructions for the Local Gas Inspector’s use.

INSTALLER: Please leave these Instructions with this unit for the owner.

OWNER: Please retain these instructions for future reference.

WARNING:

If the information in this manual is not followed exactly, fire or shock may result causing property damage or personal injury.

Do not repair or replace any part of the appliance unless specifically recommended in the manuals. Improper installation, service or maintenance can cause injury or property damage or void product warranty. Refer to this manual for guidance. All other servicing should be done by a qualified technician.

CAUTION:

The unit is heavy and should be handled accordingly. Proper safety equipment such as gloves and adequate manpower of at least two people must be used in moving the hood to avoid injury and to avoid damage to the unit or the floor. Rings, watches, and any other loose items that may damage the unit or otherwise might become entangled with the unit should be removed.

Hidden surfaces may have sharp edges. Use caution when reaching behind or under appliance.

Safety Codes and Standards

This appliance complies with the following Standards:

UL 507, Standard for the Safety of Electrical Fans

CAN/CSA-C22.2 No. 113, Fans and Ventilators

It is the responsibility of the owner and installer to determine if additional requirements and/or standards apply to specific installations. Always refer to local codes to ensure all requirements are met.

If required by the National Electrical Code (or Canadian Electrical Code), this appliance must be installed on a separate branch circuit.

INSTALLER — show the owner the location of the circuit breaker or fuse. Mark it for easy reference.

WARNING:

Turn off power circuit at service panel and lock out panel before wiring this appliance. Requirement: 120 VAC, 60 Hz 20 A. Allow the appliance to cool after the power has been turned off before servicing the appliance.

WARNING:

To reduce the risk of fire use only metal ductwork.

CAUTION:

Vent unit to the outside of building only. This unit is only designed to be vented outside. It should not be used for recirculation mode.

Never modify or alter the construction of the appliance. For example, do not remove panels or wire covers.

English 1

Image 3
Contents Installation Manual Table of Contents Safety Safety Codes and StandardsBefore You Begin To Reduce The Risk Of Fire Or Electric Shock Grounding InstructionsInstallation Preparation General InformationParts Included Tools and Parts Needed Considerations Before Installing HoodDuctwork Preparation Ducting RecommendationsLength ft Equivalent Duct Lengths for Commonly Used TransitionsDischarge Direction Electrical RequirementsHood Preparation Electrical Data on the Data Rating PlateHood Transition Assembly of the TransitionHood mounting Heights Installation InstructionsWall Mount Installation Installation SpecificationsHood Size Wooden BracketScrew quantity dependent on hood size Duct Covers Assembly & Installation optionalTap Holes Conduit Holes Cabinet InstallationPlan View of Cabinet Cutout HoodAmps Blower Motor InstallationIntegral Blower Installation Only SKU CFMWiring the Hood with a Remote Blower Wiring the Hood with an Integral BlowerVTI1010D Inline Blower Wiring the Hood with an Inline BlowerRoute wires here Wire Cover Wire Routing InstructionInstalling Grease Trays, Filters and Spacers Halogen Light ReplacementHeat Lamp Replacement some models Consignes de sécurité Préparation de linstallationInstructions d’installation Table des matièresCet appareil est conforme aux normes suivantes SécuritéAvant de commencer Approuvées Pour Utilisation Résidentielle SeulementInstructions de mise à la terre Renseignements sur la planification Préparation pour linstallationRenseignements généraux Renseignements sur la planificationOutils et pièces requises Facteurs à prendre en compte avant d’installer la hotteRecommandations pour le conduit Préparation du conduit daérationPage Tableau 1 Longueur du Conduit Type de conduit Pièce po équivalente piOrientation du débouché Données électriques sur la plaque signalétiqueExigences électriques Préparation de la hotteAssemblage du raccord Raccord de hotteAvis Instructions d’installationInstallation murale Spécifications relatives à l’installationVis de 3 po Mm chacune Support En bois Dimension DE LA HotteMm M La quantité de vis dépend de la taille de la hotte Installation sous une armoireLA Hotte Dimension DEVue en plan de l’ouverture pratiquée dans l’armoire Trous à vis a Ouverture pour Le conduit BPour l’installation d’un ventilateur intégré seulement TensionVentilateur Les fils à la Câblage de la hotte avec un ventilateur intégréDia.97/8po Câblage de la hotte avec un ventilateur à distanceVentilateur de conduit VTI1010D Câblage de la hotte avec un ventilateur de conduitTrajet des fils pour le débouché vertical Acheminement des câblesRemplacement des lampes infrarouges certains modèles Remplacement des ampoules halogènesInstrucciones de instalación Índice de materiasSeguridad InstalaciónSeguridad Solamente Para UN USO ResidencialEste aparato cumple con las siguientes normas Para Reducir Los Riesgos De Incendio O De Descarga Eléctrica Instrucciones para la toma de tierraPreparación para la instalación Información generalInformación acerca de la planificación Nota Factores a tener en cuenta antes de instalar la campanaRecomendaciones para el conducto Herramientas y piezas necesariasPage Pieza de conducto Orientación de la salida Datos eléctricos de la placa señaléticaEnsamblaje del racor Racor de campanaInstrucciones de instalación Especificaciones acerca de la instalaciónAviso Nota Dimensión DE LA CampanaLínea central del racor Instalación bajo un armario Tornillos Conducto DimensiónAgujeros para Abertura para el DE LAPara la instalación de un ventilador integrado sólo TensiónVentilador Figura 17 Ubicación de las clavijas soldadas Cableado de la campana con un ventilador integradoCaja de conexiones Figura 12 en la página Cableado de la campana con un ventilador a distanciaFigura 22 Ventilador en línea VTI1010D Cableado de la campana con un ventilador en líneaInstrucciones para el recorrido del cableado Recorrido de los cables con la salida verticalRecorrido de los cables con la salida horizontal Reemplazo de las bombillas halógenas Reemplazo de las lámparas infrarrojas algunos modelosPage Entretien ServiceParts & Accessories Pièces et Accessoires
Related manuals
Manual 38 pages 59.84 Kb

PH36GS, PH30HS, PH36HS, PH42GS, PH48GS specifications

The Thermador PH54GS, PH48HS, PH48GS, PH42GS, and PH36HS are a distinguished range of built-in refrigeration solutions, seamlessly combining style, efficiency, and advanced technology to enhance any kitchen environment. Each model in this collection is designed to provide optimal food preservation while offering a variety of features that cater to the needs of modern culinary enthusiasts.

The Thermador PH54GS features a spacious 54-inch design that offers ample storage space for all your cooling needs. It boasts a top-of-the-line cooling system that maintains consistent temperatures, ensuring fresh food for longer periods. The model incorporates a sleek stainless-steel finish that adds elegance to any kitchen. Furthermore, advanced magnetic door seals help retain cold air, leading to energy efficiency.

The PH48HS is another stunning model that measures 48 inches. It comes equipped with the innovative Cool Air Flow system, providing even airflow and temperature distribution throughout the interior. This model also features a unique Dual Compressor system that minimizes temperature fluctuations, keeping food fresher longer. Additionally, LED lighting illuminates the interior, allowing for easy visibility and a premium look.

Moving to the PH48GS, this 48-inch unit champions flexibility with adjustable shelving and various storage compartments. Its high-quality glass shelves can hold heavy items while allowing bright LED lights to shine through, enhancing visibility. The unit is also equipped with a filtered water dispenser, ensuring clean drinking water is readily available.

The PH42GS, a 42-inch option, offers similar features with a focus on convenience. Its integrated ice maker supplies a steady stream of fresh ice, perfect for entertaining or daily hydration. The model also boasts a sophisticated touchscreen control panel that allows users to personalize their cooling settings with ease.

Lastly, the PH36HS is a compact yet powerful 36-inch refrigeration solution. Its sleek design and smart storage solutions, like adjustable bins, make it ideal for smaller kitchens without compromising on functionality. This model also emphasizes energy savings, designed with insulation that minimizes energy loss.

In conclusion, the Thermador PH series is an exceptional choice for discerning homeowners seeking stylish, efficient refrigeration. With innovative technologies, ample storage, and customizable options, these models redefine luxury and functionality in the kitchen.