Thermador®
Thermador ESC30 and GSC30 30 inch range error codes
Error Codes | Causes | Example | Corrective Action | |
F1 | Supervisory relay enable | Bake or broil relay stuck closed | Cancel key will clear error if fault remains it will | |
| shorted |
| appear again in 16 seconds. If reappears replace | |
|
|
| relay board. | |
F2 | Cook/Clean runaway | Bad sensor or poor contacts on | Check sensor, cut out molex connector, use wire | |
temperature alarm | molex connector. | nuts for good contact. See Note 1 | ||
| ||||
|
|
|
| |
F3 | Open oven sensor | Bad sensor or poor contact on | Check sensor, cut out molex connector, use wire | |
molex connector | nuts for good contact. See Note 1 | |||
|
| |||
|
|
|
| |
F4 | Shorted oven sensor | Bad sensor or pinched sensor | Check sensor see note 1 | |
leads | ||||
|
|
| ||
|
|
|
| |
F5 | Supervisory relay enable |
| Replace relay bd. | |
open |
| |||
|
|
| ||
|
|
|
|
19