|
|
|
| B |
|
|
|
|
|
|
|
| Range Error Codes |
|
|
| |
|
|
|
|
|
|
| CODE | DESCRIPTION | WHEN CHECKED | FAULT |
|
|
|
|
| LIMIT |
|
| F31 | Oven temperature sensor failure | Cook or clean programmed | 20 sec |
|
| F33 | Warning Drawer Sensor Failure | When W. Drawer is active | 20 sec |
|
| F41 | Motorized latch will not lock | Latch should be locked | 1 min |
|
| F43 | Motorized latch will not unlock | Latch should be unlocked | 1 min |
|
| F45 | Motorized Latch both locked and unlocked | Always | 1 min |
|
| F111 | Runaway Oven temperature 585°F | Latch unlocked | 5 sec |
|
| F113 | Runaway Oven temperature 950°F | Latch locked | 5sec |
|
| F121 | Stuck key in the membrane switch layer | Always | 1 min |
|
|
|
|
|
|
|
| F125 | Cancel key circuit problem | Always | 1 min |
|
|
|
|
|
|
|
| F141 | Slave micro not functioning | Always | 1 min |
|
| F151 | Eeprom failure or communication circuit failure | Cook or clean programmed | 1 sec |
|
| F153 | User Interface too hot | Always | 1 sec |
|
| F154 | Power Board too hot | Always | 1 sec |
|
| F155 | Cook profile corrupted in EEPROM | Cook or clean Programmed | 1 sec |
|
|
|
|
|
|
|
| F170 | Power Failure | Always | 2 ms |
|
| F190 | Power over voltage | At power on |
|
|
| F200 | Time out and stop function | During Production test mode | 110 sec. |
|
| F210 | Range exceeded safe test limits | During Service test mode | 200°F |
|