B
Problem | Possible Solutions | |
|
|
|
One of the elements is not | 1. | Check all connections between the relays on the Power Board and the |
energized. | 2. | elements. |
| Check the relay outputs on the Power Board. | |
|
| |
All the elements are not energized. | 1. Check the common L1 red wire on the Power Board relays. | |
| 2. | Check the safety thermostat connection in series with black L2 wire. |
| 3. | Check, if present, the DLB relay connections on the Auxiliary Relay |
|
| Board. |
| 4. | Check, if present, the DLB relay outputs. If they are not OK, replace |
|
| the Auxiliary Relay Board. |
|
|
|
Display never turns on | 1. | Check Power supply connection on the Power Board (P18 for double |
|
| oven, P5 for single oven). |
| 2. | Check the P1A cable between Power and Display Board. |
| 3. | Disconnected the P1A cable and measure by a meter the voltages on |
|
| the P1A connector on the Power Board. |
|
| a. If they meet the values indicated in the electric schematics then |
|
| replace the Display Board. |
|
| b. If they don’t meet, replace the Power Board. |
41