Thermador PRG36, PRG48, PRG304, PRDS48 PRDS304 and PRDS36 Dual-Fuel Ranges Figures 11, 14

Page 15

STEP4: INSTALLINGANTI-TIPDEVICE

STEP H: Using the 1/4"-20 x 1/2" Hex Head Bolt, Hex Nut and two (2) Flat Washers, securely attach the Adjustable Anti-Tip Channel to the existing hole in the flange located at the bottom rear of the range. (There are two (2) holes in the range flange, so be certain to select the hole that is on the same side as the mounting bracket.) The flat face of the channel should be flush against the underside of the range flange. From the bottom of the channel, screw the two (2) #10 x 1/2" Phillips Screws up through the first pair of holes extending beyond the rear edge of the range flange. These screws will prevent rotation of the channel. Note: A number of mounting holes are provided in the Adjustable Anti-Tip Channel. Be certain to use the hole that enables the channel to engage the mounting bracket when the range is in its final installed position. For ranges that are to be installed flush against a rear wall, use the first hole in the Adjustable Anti-Tip Channel, such that the short portion of the channel extends out from the bottom of the range flange and the long portion is hidden beneath the range. Refer to Figure 10.

STEP I: Carefully slide the range into posi- tion. FOR THE ANTI-TIP CHANNEL TO ENGAGE THE MOUNTING BRACKET, THE REAR EDGE OF THE RANGE SIDE PANEL MUST BE WITHIN 2" OF THE VERTICAL

FIG. 13 PRG36 Floor Mount

PLAN VIEW

Anti-Tip Channel

➝

➝Mounting Bracket

PRG304: 2-3/4"

PRG36: 4-5/8"

May Be Used On Either Left or Right Side (Right Shown)

SIDEVIEW

 

➝

Anti-Tip Channel

 

 

Leveling Leg ➝

➝

Mounting Bracket

 

 

MOUNTING FLANGE OF THE ANTI-TIP BRACKET, AND THE ADJUSTABLE MOUNTING CHANNEL MUST BE AT- TACHED TO THE APPROPRIATE MOUNT- ING HOLE. REMOVE ANY LOOSE ITEMS SUCH AS GRATES AND BURNER CAPS FROM THE TOP OF THE RANGE, THEN CAREFULLY TILT THE RANGE FORWARD TO ENSURE THAT THE ANTI-TIP DEVICE

ENGAGES TO PREVENT TIPPING.

PRDS304 AND PRDS36 Dual-Fuel Ranges (Figures 11, 14 and 15)

STEP A: Determine the best location for Anti- Tip Channel Mounting Bracket. The bracket may be mounted to the wall or floor behind the range, offset from side wall as indicated in the chart below and in Figures 14 and 15:

Model No.

"A", Min.

"B", Max.

PRDS304

5-1/2"

16-1/2"

PRDS36

6-1/2"

13-1/2"

-For Model PRDS304, the dimensions shown are from the left side wall only.

-For Model PRDS36, the dimensions shown are from either the left or right side wall. Locate the bracket on the side of the range that will not interfere with the gas supply line, electrical wiring, conduit or any other item.

-Select either the rear wall or the floor for mounting the bracket, based upon which will provide the greatest holding strength.

Page 13

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Installationinstructionsmanual Professionalranges Table of Contents Introduction ImportantinstallationinformationFor Residential Use Only AvertissementsenfrancaisAvertissement Select Hood and Blower Models VentilationrequirementsCabinet Clearances CabinetpreparationCabinetpreparation Typ ELECTRICALSUPPLY,DUALFUELRANGES UNPACKING, Moving and Placingthe Range UNPACKING,MOVING and Placingthe Range WiresProperty Damage INSTALLINGANTI-TIPDEVICERange Tipping Hazard Electrical Shock HazardPRDS304 and PRDS36 Dual Fuel Ranges Figure PRG304 and PRG36 All-Gas Ranges Figures 9, 10, 12a 12b PRDS304 and PRDS36 Dual-Fuel Ranges Figures 11, 14 Prds Wall Mount Propane Gas Requirements GasrequirementsandhookupHook UP Natural Gas RequirementsChart C Electrical Supply Circuit Requirements Chart D Power Supply Wire Rating and Size RequirementsELECTRICALREQUIREMENTS,CONNECTION&GROUNDING Location of Junction Box On PRDS304 Range Conductor Securement Do not Ground to a GAS Supply Pipe See . This method is not recommendedBackguardinstallation Chart D Backguard KIT Model NumbersELECTRICALREQUIREMENTS,CONNECTIONS&GROUNDING Step TestandadjustmentGriddle Grill To Clean and Protect Exterior SurfacesElectrical InstallerchecklistFinal Check List GAS SupplyPage
Related manuals
Manual 28 pages 62.99 Kb Manual 120 pages 14.46 Kb Manual 67 pages 43.12 Kb Manual 88 pages 28.71 Kb

PRDS48, PRG304, PRG36, PRG48 specifications

The Thermador PRG30 and PRG36 represent the pinnacle of luxury cooking with their high-performance gas range features and advanced technology. Designed for serious home chefs, these models exemplify efficiency, style, and culinary excellence.

One of the most notable features of the Thermador PRG series is the powerful Pro Grand dual-fuel cooking system. With a combination of gas burners and an electric convection oven, these ranges allow for precision cooking and even heat distribution. The PRG30 boasts a compact size with 30 inches of width, while the PRG36 expands the cooking surface with 36 inches, accommodating larger pots and pans.

Both models come equipped with high BTU burners, reaching up to 18,000 BTUs on the powerful Star Sapphire burners. These allow for rapid boiling and intense heat, ideal for searing meats or achieving high-temperature sautéing. Furthermore, the PRG series includes an innovative simmer setting that enables precise low-heat cooking, perfect for delicate sauces or melting chocolate.

Thermador has integrated their patented Star Burner design in both models. This unique feature provides a larger flame spread compared to traditional round burners. Consequently, it allows for better heat distribution, significantly enhancing cooktop efficiency. The cooktop is designed with six burners, giving chefs the flexibility to cook multiple dishes simultaneously without sacrificing performance.

The ovens in the PRG30 and PRG36 are equally impressive, featuring a spacious capacity of 4.4 cubic feet. The Convection Bake function circulates air for optimal baking results, ensuring even browning and consistent cooking. The models also include a number of innovative cooking modes, such as the Bake, Broil, and Roast settings, enhancing the overall cooking experience.

Additionally, self-cleaning options simplify maintenance, allowing for effortless cleaning after extensive use. The design of the PRG series is complemented by a sleek stainless-steel exterior that not only adds elegance to the kitchen but is also durable and easy to maintain.

In terms of safety, both models feature a safety system that prevents accidental ignition and precise temperature control, ensuring a safe cooking environment. With a focus on high performance, cutting-edge technology, and meticulous design, the Thermador PRG30 and PRG36 gas ranges offer an unparalleled cooking experience for culinary enthusiasts looking to elevate their kitchen capabilities.
Top Page Image Contents