Burner Test and Adjustment | Thermador PD30, PD36, PD48 instruction

Step 9: Burner Test and Adjustment

Install any loose components, such as burner caps and grates, that may have been removed earlier. Be certain that burner caps seat properly into the burner bases. Before testing operation of the appli- ance, verify that the unit and the gas supply have been carefully checked for leaks and that the unit has been connected to the electrical power supply. Turn the manual gas shut-off valve to the open position.

Test Rangetop Burners

Test Burner Ignition. Select a rangetop burner knob. Push down and turn counterclockwise to HI. The ignitor/spark module will produce a clicking sound. Once the air has been purged from the supply lines, the burner should light within four (4) seconds.

Test Flame: High Setting. Turn burner on to HI. See Figure 14 for appropriate flame characteristics.

If any of the rangetop burners continue to burn mostly or completely yellow, verify that the burner cap is positioned properly on the burner base, then retest. If flame characteristics do not improve, call Thermador®.

Test Flame: Low Setting. Turn burner on to LO. Verify that the flame completely surrounds the burner. There should be a flame at each burner port and there should be no air gap between the flame and the burner. If any burners do not carry over, call Thermador®.

The two rangetop burners on the left side feature XLO®, causing the flame to cycle on and off when the knob is set to the XLO range. This is normal operation.

Repeat the Ignition and Flame Test procedures, described above for each rangetop burner and the grill burner (if so equipped).

FIG. 14 Flame Characteristics

Yellow Flames:

Further adjustment is required.

Yellow Tips on Outer Cones:

Normal for LP Gas.

Soft Blue Flames:

Normal for Natural Gas.

If the flame is completely or mostly yellow, verify that the regulator is set for the correct fuel. After adjustment, retest.

Some orange-colored streaking is normal during the initial start-up.

Allow unit to operate 4-5 minutes and reevaluate before making adjustments.

WHEN FLAME IS PROPERLY ADJUSTED:

There should be a flame at each burner port.

There should be no air gap between the flame and burner port.

The gas grill uses a tube-style burner that has an air shutter which allows adjustment to the amount of the primary air inside the burner tube.

Air shutters of tube-style burners are pre-adjusted at the factory, and usually do not require readjust- ment except under rare conditions such as installa- tion at high altitude.

If grill burner/flame adjustment is required, go to the procedure: "Flame Adjustment (if necessary)".

PD30, PD36, PD48 specifications

Thermador is a renowned name in the world of luxury kitchen appliances, and their Professional Series offers some of the most advanced cooking solutions on the market. The PD30, PD36, and PD48 are standout models in this series, each designed to cater to different kitchen sizes and cooking needs, while still providing exceptional performance and design.

The Thermador PD30, with its compact size, is perfect for smaller kitchens or spaces where every inch counts. Despite its smaller footprint, it doesn't skimp on features. It boasts a powerful 18,000 BTU burner that provides intense heat for searing and boiling, ensuring that your meals are cooked to perfection. The PD30 also includes innovative Star Burners with a unique shape that allows for better heat distribution, maximizing cooking efficiency.

Moving up in size, the PD36 offers additional burner capacity without sacrificing performance. This model features six powerful burners, including a dedicated simmer burner, which is ideal for delicate sauces and dishes that require careful temperature control. Its larger cooking surface allows home chefs to prepare multiple dishes simultaneously, making it an excellent choice for anyone who loves to entertain.

Finally, the PD48 stands as the flagship model in this series, catering to serious chefs and those with larger kitchens. With eight burners, including a powerful high-heat burner that reaches up to 22,000 BTUs, the PD48 is designed for heavy-duty cooking. This model also incorporates the innovative Continuous Grate Design, enabling easy movement of pots and pans across the entire cooktop. This feature ensures smooth transitions while cooking, providing convenience and efficiency.

All three models are equipped with cutting-edge technologies, such as the patented Star Burner design that optimizes flame coverage for better cooking performance. Thermador’s exclusive ExtraLow feature on select burners allows chefs to maintain low temperatures for extended periods, perfect for melting chocolate or keeping delicate sauces warm without scorching.

In addition to their advanced performance features, the PD series also shines in design. Each model is crafted with a professional-grade stainless steel finish, making them visually stunning and durable. The intuitive controls are ergonomically designed, providing ease of use and precise temperature adjustments.

In summary, the Thermador PD30, PD36, and PD48 cooktops exemplify the perfect blend of luxury, performance, and design. Whether you need a compact solution or a high-capacity powerhouse, these models offer a range of features and technologies to elevate your cooking experience. With Thermador, you can trust that your kitchen is equipped with the best tools to create culinary masterpieces.