About the ice and water dispenser, To Use the Dispenser

About the ice and water dispenser.

On some models

Safety

To Use the Dispenser

Press the rim of the glass gently against the dispenser pad.

Select CUBES , CRUSHED ICE (on

some models) or WATER .

The spill shelf is not self-draining. To reduce water spotting, the shelf and its grille should be cleaned regularly.

Spill Shelf

If no water is dispensed when the refrigerator is first installed, there may be air in the water line system. Press the dispenser pad for at least two minutes to remove trapped air from the water line and to fill the water system. To flush out impurities in the water line, throw away the first six glassfuls of water.

A light switch (on some models) turns the night light in the dispenser on or off. The light also comes on when the dispenser pad is pressed. The light in the dispenser should be replaced with a 7-watt maximum bulb when it burns out.

CAUTION: Never put fingers or any other objects into the ice crusher discharge opening.

Instructions Operating Instructions

Ice Storage Bin

To remove:

Rotate

Lift the left corner to free the bin from the shelf and pull the bin straight out while sup- porting it at front and rear.

To replace:

Drive

Slide the bin back until the tab on the bin Mechanism locks into the slot on the shelf. If the bin

does not go all the way back, remove it and rotate the drive mechanism 1/4 turn. Then push the bin back again.

Installation Instructions

Important Facts About Your Dispenser

■Add ice before filling the glass with a bev- erage. This will prevent splashing, which could cause the ice selector switch

to stick or bind.

■Do not add ice from trays or bags to the storage bin. It may not crush or dis- pense well.

■Avoid overfilling glass with ice and use of narrow or extra-tall glasses. Backed-up ice can jam the chute or cause the door in the chute to freeze shut. If ice is blocking the chute, poke it through with a wooden spoon.

■Beverages and foods should not be quick-chilled in the ice storage bin. Cans, bottles or food packages in the stor- age bin may cause the icemaker or auger to jam.

■Some crushed ice may be dispensed even though you selected CUBES. This hap- pens occasionally when a few cubes acci- dentally get directed to the crusher.

■After crushed ice is dispensed, some water may drip from the chute.

■Sometimes a mound of snow will form on the door in the ice chute. This condition is normal and usually occurs when you have dispensed crushed ice repeatedly. The snow will eventually evaporate.

■Dispensed water is not ice cold. For cold- er water, simply add crushed ice or cubes before dispensing water.

Troubleshooting Tips

Customer Service

22-27 specifications

The GE 22-27 is a versatile and efficient locomotive designed for a variety of rail transport applications. It showcases General Electric's commitment to innovation and performance in the rail industry. The 22-27 model is particularly known for its robust engineering and technological advancements that enhance its operational capabilities.

One of the main features of the GE 22-27 is its impressive power output, which is generated by a highly efficient diesel engine. This locomotive is equipped with a state-of-the-art 12-cylinder engine that delivers an output ranging typically from 2000 to 3000 horsepower. This significant power allows the locomotive to handle heavy freight loads while maintaining reliable speed and efficiency.

In terms of technology, the GE 22-27 incorporates advanced electronic controls that optimize engine performance and fuel consumption. The use of microprocessor-based control systems provides improved diagnostics and maintenance capabilities, enabling operators to monitor the health of the locomotive in real time. By utilizing these modern technologies, the GE 22-27 reduces downtime and increases overall productivity for rail operators.

Another characteristic of the GE 22-27 is its superior traction capabilities. The locomotive features a sophisticated traction control system that ensures optimal performance on various terrains and track conditions. This system allows for better acceleration and deceleration, making it suitable for both heavy freight and passenger transport.

The design of the GE 22-27 also emphasizes operator comfort and safety. The cab is ergonomically designed with user-friendly controls, allowing for easier navigation and operation for the crew. Additionally, the locomotive is equipped with modern safety features, including advanced braking systems and enhanced visibility aids, ensuring safe operation in diverse environments.

Moreover, the GE 22-27 is built with durability in mind. Its construction incorporates high-quality materials that withstand the rigors of heavy-duty usage, resulting in a long service life with minimal maintenance needs. This durability, combined with the locomotive's efficiency, ultimately translates into lower operational costs for railway companies.

In conclusion, the GE 22-27 locomotives stand out in the rail industry due to their powerful performance, advanced technology, traction capabilities, and focus on safety and operator comfort. These characteristics make them an excellent choice for rail operators looking for a reliable and efficient locomotive solution.