GE 200D26000P022 installation instructions Replacing the light bulbs, Instructions Operating

Page 15

Replacing the light bulbs.

www.GEAppliances.com

Setting either or both controls to 0 does not remove power to the light circuit.

Safety

Refrigerator Compartment—Upper Light

Unplug the refrigerator.

The bulbs are located at the top of the

Tabscompartment, inside the light shield. Remove the screw at the front of the light shield.

To remove the light shield, press in on the tabs on the sides of the shield and slide forward and out.

After replacing the bulb with an appliance bulb of the same or lower wattage, replace the light shield and screw. When replacing the light shield, make sure that the tabs at the back of the shield fit into the slots at the back of the light shield housing.

Plug the refrigerator back in.

Instructions Operating

Refrigerator Compartment—Lower Light

This light is located above the top drawer.

 

After replacing the bulb with an

 

Unplug the refrigerator.

 

appliance bulb of the same or lower

 

 

 

wattage, replace the shield.

 

 

 

 

 

Lift the light shield up and pull it out.

 

 

Plug the refrigerator back in.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Instructions Installation

Freezer Compartment

Unplug the refrigerator.

Remove the shelf just above the light shield. (The shelf will be easier to remove if it is emptied first.) Remove the screw at the top of the light shield.

To remove the light shield, press in on the sides, and lift up and out.

Replace the bulb with an appliance bulb of the same or lower wattage, and reinstall the light shield. When reinstalling the light shield, make sure the top tabs snap securely into place. Replace the screw.

Reinstall the shelf and plug the refrigerator back in.

Instructions Troubleshooting

Dispenser

Unplug the refrigerator.

Replace the bulb with a bulb of the

The bulb is located on the dispenser

same size and wattage.

 

under the control panel.

Plug the refrigerator back in.

Remove the light bulb by turning

 

it counterclockwise.

 

15

Tips Consumer Support

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Serial # Side by SideSafety Precautions Operating Instructions Before You Throw Away Your Old Refrigerator or FreezerRefrigerants Instructions Operating Instructions HOW to Connect ElectricityAbout TurboCool on some models About the temperature controlsTroubleshooting Tips Consumer Support How to UseWater Filter Cartridge When to Replace the FilterInstalling the Filter Cartridge About the water filter on some modelsAbout the shelves and bins Refrigerator Door Bins and Freezer Door Tilt-Out BinsSlide-Out Spillproof Shelf Fixed Freezer Shelves QuickSpace Shelf on some modelsFreezer Baskets Slide-Out Freezer ShelvesDoor Alignment SafetyAbout the refrigerator doors Refrigerator DoorsConsumer Support Troubleshooting Tips About the crispers and pansAbout crisper removal Automatic Icemaker About the automatic icemakerAbout the ice and water dispenser on some models Consumer Support TroubleshootingInstallation Care and cleaning of the refrigeratorPreparing to Move Consumer Support Troubleshooting Tips InstallationBehind the Refrigerator Preparing for VacationInstructions Operating Replacing the light bulbsBefore YOU Begin PreparationTools YOU will Need Remove the Base Grille Moving the RefrigeratorRemove the Freezer Door Disconnect the Power Coupling on some modelsRemove the Refrigerator Door However, please note the following Replacing the DoorsClearances Refrigerator LocationPlug in the Refrigerator Turn on the Water SupplyLevel the Doors Level the RefrigeratorReplace the Base Grille Start the IcemakerSET the Controls What YOU will Need Shut OFF the Main Water Supply Choose the Valve LocationDrill the Hole for the Valve Route the Tubing Fasten the Shutoff ValveConnect the Tubing To the Valve Tighten the Pipe ClampHummm Normal operating soundsBefore you call for service… Small or hollow cubes See Care and cleaningIce cubes have Odor/tasteBut Crushed ICE Temperatures are OKNo water or ice cube ProductionConsumer Warranty Thirty Days GE Will ReplaceWhat GE Will Not Cover One YearSpecial Notices Performance Data SheetOperating Specifications General Installation/Operation/Maintenance RequirementsWater Treatment Device Certificate Number Troubleshooting Tips Installation Instructions Operating Instructions Safety InstructionsWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Page Consumer Support GE Appliances Website Schedule Service

200D26000P022 specifications

The GE 200D26000P022 is a highly advanced and versatile industrial motor designed by General Electric for various heavy-duty applications. Known for its robust performance and durability, this motor is integral to many manufacturing and processing environments.

One of the primary features of the GE 200D26000P022 is its impressive power output, making it suitable for demanding applications that require high torque and efficiency. The motor operates on a high voltage, which allows for significant energy savings and improved operational efficiency. Its design includes a host of advanced engineering features that enhance its performance, including higher speed ratings and excellent thermal management.

Incorporating state-of-the-art technologies, the GE 200D26000P022 integrates permanent magnet motor technology, which enhances its efficiency compared to traditional induction motors. This results in lower energy consumption, reducing operating costs and minimizing the environmental impact. The motor's design also emphasizes minimal maintenance requirements, allowing users to enjoy extended service life with reduced downtime.

Another notable characteristic of the GE 200D26000P022 is its adaptability. This motor can seamlessly be integrated into various applications, including pumps, compressors, and conveyors. Its ability to function in diverse environments, including those with harsh conditions, is a testament to its robust engineering design. The motor is constructed with high-quality materials that provide resistance to corrosion, heat, and mechanical stress.

Additionally, the GE 200D26000P022 is equipped with advanced control systems. These systems allow for precise speed and torque management, enhancing overall operational efficiency. The motor can be controlled using various protocols, making it compatible with numerous industrial automation frameworks. This feature facilitates easier integration into modern smart factories and automation solutions.

In summary, the GE 200D26000P022 stands out for its powerful performance, energy efficiency, and versatility. Its innovative technologies and robust characteristics make it an ideal choice for industries seeking reliable motor solutions capable of handling heavy loads and demanding conditions. As a result, it continues to be a preferred option for professionals in the industrial sector looking to enhance their operations.
Top Page Image Contents