GE 200D26000P022 installation instructions Turn on the Water Supply, Plug in the Refrigerator

Page 22

Installation Instructions

INSTALLING THE REFRIGERATOR (CONT.)

1

A

B

CONNECTING THE REFRIGERATOR TO THE HOUSE WATER LINE (icemaker and dispenser models)

A cold water supply is required for automatic icemaker and dispenser operation. If there is not a cold water supply, you will need to provide one. See “Installing the Water Line” section.

NOTES:

•Before making the connection to the refrigerator, be sure the refrigerator power cord is not plugged into the wall outlet.

•If your refrigerator does not have a water filter, we recommend installing one if your water supply has sand or particles that could clog the screen of the refrigerator’s water valve. Install it in the water line near the refrigerator. If using GE SmartConnect™ Refrigerator Tubing Kit, you will need an additional tube (WX08X10002) to connect the filter. Do not cut plastic tube to install filter.

If you are using copper tubing, place a compression nut and ferrule (sleeve) onto the end of the tubing coming from the house cold water supply.

If you are using the GE SmartConnect™ tubing, the nuts are already assembled to the tubing.

If you are using copper tubing, insert the end of the tubing into the refrigerator connection, at the back of the refrigerator, as far as possible. While holding the tubing, tighten the fitting.

If you are using GE SmartConnect™ tubing, insert the molded end of the tubing into the refrigerator connection, at the back of the refrigerator, and tighten the compression nut until it is hand tight. Then tighten one additional turn with a wrench. Overtightening may cause leaks.

CFasten the tubing into the clamp provided to hold it in position. You may need to pry open the clamp.

Tubing Clamp

″

 

1/4 Tubing

1/4″

 

Compression Nut

 

Ferrule

 

(sleeve)

 

Refrigerator

SmartConnect™ Tubing

Connection

 

2TURN ON THE WATER SUPPLY

Turn the water on at the shutoff valve (house water supply) and check for any leaks.

3PLUG IN THE REFRIGERATOR

Before plugging in the refrigerator, make sure the icemaker power switch is set to the O (off) position.

See the grounding information attached to the power cord.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Side by Side Serial #Safety Precautions Before You Throw Away Your Old Refrigerator or Freezer Operating InstructionsRefrigerants HOW to Connect Electricity Instructions Operating InstructionsHow to Use About the temperature controlsTroubleshooting Tips Consumer Support About TurboCool on some modelsAbout the water filter on some models When to Replace the FilterInstalling the Filter Cartridge Water Filter CartridgeRefrigerator Door Bins and Freezer Door Tilt-Out Bins About the shelves and binsSlide-Out Spillproof Shelf Slide-Out Freezer Shelves QuickSpace Shelf on some modelsFreezer Baskets Fixed Freezer ShelvesRefrigerator Doors SafetyAbout the refrigerator doors Door AlignmentAbout the crispers and pans Consumer Support Troubleshooting TipsAbout crisper removal About the automatic icemaker Automatic IcemakerConsumer Support Troubleshooting About the ice and water dispenser on some modelsCare and cleaning of the refrigerator InstallationPreparing for Vacation Consumer Support Troubleshooting Tips InstallationBehind the Refrigerator Preparing to MoveReplacing the light bulbs Instructions OperatingPreparation Before YOU BeginTools YOU will Need Moving the Refrigerator Remove the Base GrilleDisconnect the Power Coupling on some models Remove the Freezer DoorRemove the Refrigerator Door Replacing the Doors However, please note the followingRefrigerator Location ClearancesTurn on the Water Supply Plug in the RefrigeratorLevel the Refrigerator Level the DoorsStart the Icemaker Replace the Base GrilleSET the Controls What YOU will Need Choose the Valve Location Shut OFF the Main Water SupplyDrill the Hole for the Valve Tighten the Pipe Clamp Fasten the Shutoff ValveConnect the Tubing To the Valve Route the TubingNormal operating sounds HummmBefore you call for service… Odor/taste See Care and cleaningIce cubes have Small or hollow cubesProduction Temperatures are OKNo water or ice cube But Crushed ICEConsumer Warranty One Year GE Will ReplaceWhat GE Will Not Cover Thirty DaysGeneral Installation/Operation/Maintenance Requirements Performance Data SheetOperating Specifications Special NoticesWater Treatment Device Certificate Number Operating Instructions Safety Instructions Troubleshooting Tips Installation InstructionsWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Page GE Appliances Website Schedule Service Consumer Support

200D26000P022 specifications

The GE 200D26000P022 is a highly advanced and versatile industrial motor designed by General Electric for various heavy-duty applications. Known for its robust performance and durability, this motor is integral to many manufacturing and processing environments.

One of the primary features of the GE 200D26000P022 is its impressive power output, making it suitable for demanding applications that require high torque and efficiency. The motor operates on a high voltage, which allows for significant energy savings and improved operational efficiency. Its design includes a host of advanced engineering features that enhance its performance, including higher speed ratings and excellent thermal management.

Incorporating state-of-the-art technologies, the GE 200D26000P022 integrates permanent magnet motor technology, which enhances its efficiency compared to traditional induction motors. This results in lower energy consumption, reducing operating costs and minimizing the environmental impact. The motor's design also emphasizes minimal maintenance requirements, allowing users to enjoy extended service life with reduced downtime.

Another notable characteristic of the GE 200D26000P022 is its adaptability. This motor can seamlessly be integrated into various applications, including pumps, compressors, and conveyors. Its ability to function in diverse environments, including those with harsh conditions, is a testament to its robust engineering design. The motor is constructed with high-quality materials that provide resistance to corrosion, heat, and mechanical stress.

Additionally, the GE 200D26000P022 is equipped with advanced control systems. These systems allow for precise speed and torque management, enhancing overall operational efficiency. The motor can be controlled using various protocols, making it compatible with numerous industrial automation frameworks. This feature facilitates easier integration into modern smart factories and automation solutions.

In summary, the GE 200D26000P022 stands out for its powerful performance, energy efficiency, and versatility. Its innovative technologies and robust characteristics make it an ideal choice for industries seeking reliable motor solutions capable of handling heavy loads and demanding conditions. As a result, it continues to be a preferred option for professionals in the industrial sector looking to enhance their operations.
Top Page Image Contents