Before you call for service…

www.GEAppliances.com

Troubleshooting Tips

Save time and money! Review the charts on the following pages first and you may not need to call for service.

Problem	Possible Causes	What To Do

Refrigerator does not	Refrigerator in defrost cycle.	• Wait about 30 minutes for defrost cycle to end.
operate
operate	Either or both controls set to 0.	• Set the controls to a temperature setting.
	Either or both controls set to 0.	• Set the controls to a temperature setting.

	Refrigerator is unplugged.	• Push the plug completely into the outlet.

	The fuse is blown/circuit	•Replace fuse or reset the breaker.
	breaker is tripped.

	Refrigerator is in showroom mode. •Unplug the refrigerator and plug it back in.

Vibration or rattling	Rollers need adjusting.	•See Rollers.
(slight vibration
is normal)
Motor operates for	Normal when refrigerator	• Wait 24 hours for the refrigerator to completely
long periods or cycles	is first plugged in.	cool down.
on and off frequently.
on and off frequently.	Often occurs when large	• This is normal.
(Modern refrigerators	Often occurs when large	• This is normal.
(Modern refrigerators	amounts of food are
with more storage	amounts of food are
with more storage	placed in refrigerator.
space and a larger	placed in refrigerator.
space and a larger
freezer require more	Door left open.	• Check to see if package is holding door open.
operating time. They
operating time. They	Hot weather or frequent	• This is normal.
start and stop often	Hot weather or frequent	• This is normal.
to maintain even	door openings.
temperatures.)	Temperature controls	• See About the controls.
	set at the coldest
	setting.
Refrigerator or freezer	Temperature control not set	• See About the controls.
compartment too warm	cold enough.

	Warm weather or frequent	• Set the temperature control one step colder.
	door openings.	See About the controls.

	Door left open.	•Check to see if package is holding door open.

Frost or ice crystals	Door left open.	• Check to see if package is holding door open.
on frozen food
on frozen food	Too frequent or too long
(frost within package	Too frequent or too long
(frost within package	door openings.
is normal)	door openings.
is normal)

Divider between	Automatic energy saver	•This helps prevent condensation on the outside.
refrigerator and freezer	system circulates warm
compartments	liquid around front edge
feels warm	of freezer compartment.
Automatic icemaker	Icemaker power switch	• Set the power switch to the l (on) position.
does not work	is in the O (off) position.

	Water supply turned off or	• See Installing the water line.
	not connected.

	Freezer compartment	• Wait 24 hours for the refrigerator to completely
	too warm.	cool down.

	Piled up cubes in the storage	•Level cubes by hand.
	bin cause the icemaker
	to shut off.

	Ice cubes stuck in icemaker.	• Turn off the icemaker, remove cubes, and turn the
	(Green power light on	icemaker back on.
	icemaker blinking).

Safety Instructions Operating Instructions Installation Instructions Troubleshooting Tips Consumer Support

200D26000P022 specifications

The GE 200D26000P022 is a highly advanced and versatile industrial motor designed by General Electric for various heavy-duty applications. Known for its robust performance and durability, this motor is integral to many manufacturing and processing environments.

One of the primary features of the GE 200D26000P022 is its impressive power output, making it suitable for demanding applications that require high torque and efficiency. The motor operates on a high voltage, which allows for significant energy savings and improved operational efficiency. Its design includes a host of advanced engineering features that enhance its performance, including higher speed ratings and excellent thermal management.

Incorporating state-of-the-art technologies, the GE 200D26000P022 integrates permanent magnet motor technology, which enhances its efficiency compared to traditional induction motors. This results in lower energy consumption, reducing operating costs and minimizing the environmental impact. The motor's design also emphasizes minimal maintenance requirements, allowing users to enjoy extended service life with reduced downtime.

Another notable characteristic of the GE 200D26000P022 is its adaptability. This motor can seamlessly be integrated into various applications, including pumps, compressors, and conveyors. Its ability to function in diverse environments, including those with harsh conditions, is a testament to its robust engineering design. The motor is constructed with high-quality materials that provide resistance to corrosion, heat, and mechanical stress.

Additionally, the GE 200D26000P022 is equipped with advanced control systems. These systems allow for precise speed and torque management, enhancing overall operational efficiency. The motor can be controlled using various protocols, making it compatible with numerous industrial automation frameworks. This feature facilitates easier integration into modern smart factories and automation solutions.

In summary, the GE 200D26000P022 stands out for its powerful performance, energy efficiency, and versatility. Its innovative technologies and robust characteristics make it an ideal choice for industries seeking reliable motor solutions capable of handling heavy loads and demanding conditions. As a result, it continues to be a preferred option for professionals in the industrial sector looking to enhance their operations.