GE 200D26000P022 Ice cubes have, Odor/taste, See Care and cleaning, Small or hollow cubes

Page 30

Consumer Support Troubleshooting Tips Installation Instructions Operating Instructions Safety Instructions

Before you call for service…

Problem

 

Possible Causes

What To Do

 

 

 

 

Ice cubes have

 

Ice storage bin needs cleaning.

• Empty and wash bin. Discard old cubes.

odor/taste

 

 

 

 

Food transmitting odor/taste

• Wrap foods well.

 

 

 

 

to ice cubes.

 

 

 

 

 

 

 

Interior of refrigerator

•See Care and cleaning.

 

 

needs cleaning.

 

 

 

 

 

Small or hollow cubes

 

Water filter clogged.

•Replace filter cartridge with new cartridge or with plug.

 

 

 

 

Slow ice cube freezing

 

Door left open.

• Check to see if package is holding door open.

 

 

 

 

 

 

Temperature control not set

•See About the controls.

 

 

cold enough.

 

 

 

 

 

Orange glow in

 

Defrost heater is on.

• This is normal.

the freezer

 

 

 

 

 

 

 

Cube dispenser does not

 

Icemaker turned off or

• Turn on icemaker or water supply.

work (on some models)

 

water supply turned off.

 

 

 

 

 

 

 

Ice cubes are frozen to

• Remove cubes.

 

 

icemaker feeler arm.

 

 

 

 

 

 

An item is blocking or has fallen • Remove any item that might be blocking, or has fallen

 

 

into the ice chute inside the top

into, the chute.

 

 

door bin of the freezer.

 

 

 

 

 

 

 

Irregular ice clumps in

• Break up with fingertip pressure and discard

 

 

storage container.

remaining clumps.

 

 

 

•Freezer may be too warm. Adjust the freezer control

 

 

 

to a colder setting, one position at a time, until clumps

 

 

 

do not form.

 

 

 

 

 

 

Dispenser is LOCKED.

•Press and hold the LOCK CONTROL pad for 3 seconds.

 

 

 

 

Water has poor taste/odor

 

Water dispenser has not been

•Dispense water until all water in system is replenished.

(on some models)

 

used for a long time.

 

 

 

 

 

Water in first glass is

 

Normal when refrigerator

• Wait 24 hours for the refrigerator to completely

warm (on some models)

 

is first installed.

cool down.

 

 

 

 

 

 

Water dispenser has not been

• Dispense water until all water in system is replenished.

 

 

used for a long time.

 

 

 

 

 

 

 

Water system has been drained.

•Allow several hours for replenished supply to chill.

 

 

 

 

Water dispenser does

 

Water supply line turned

• See Installing the water line.

not work (on some models)

 

off or not connected.

 

 

 

 

 

 

 

Water filter clogged.

• Replace filter cartridge or remove filter and install plug.

 

 

 

 

 

 

Air may be trapped in the

•Press the dispenser arm for at least two minutes.

 

 

water system.

 

 

 

 

 

 

 

Dispenser is LOCKED.

•Press and hold the LOCK CONTROL pad for 3 seconds.

 

 

 

 

Water spurting from

 

Newly-installed filter cartridge.

•Run water from the dispenser for 3 minutes (about

dispenser (on some models)

 

 

one and a half gallons).

 

 

 

 

Water is not dispensed

 

Water in reservoir is

•Call for service.

(on some models) but

 

frozen.

 

icemaker is working

 

 

 

 

Refrigerator control setting

•Set to a warmer setting.

 

 

is too cold.

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Side by Side Serial #Safety Precautions Operating Instructions Before You Throw Away Your Old Refrigerator or FreezerRefrigerants HOW to Connect Electricity Instructions Operating InstructionsHow to Use About the temperature controlsTroubleshooting Tips Consumer Support About TurboCool on some modelsAbout the water filter on some models When to Replace the FilterInstalling the Filter Cartridge Water Filter CartridgeAbout the shelves and bins Refrigerator Door Bins and Freezer Door Tilt-Out BinsSlide-Out Spillproof Shelf Slide-Out Freezer Shelves QuickSpace Shelf on some modelsFreezer Baskets Fixed Freezer ShelvesRefrigerator Doors SafetyAbout the refrigerator doors Door AlignmentConsumer Support Troubleshooting Tips About the crispers and pansAbout crisper removal About the automatic icemaker Automatic IcemakerConsumer Support Troubleshooting About the ice and water dispenser on some modelsCare and cleaning of the refrigerator InstallationPreparing for Vacation Consumer Support Troubleshooting Tips InstallationBehind the Refrigerator Preparing to MoveReplacing the light bulbs Instructions OperatingBefore YOU Begin PreparationTools YOU will Need Moving the Refrigerator Remove the Base GrilleDisconnect the Power Coupling on some models Remove the Freezer DoorRemove the Refrigerator Door Replacing the Doors However, please note the followingRefrigerator Location ClearancesTurn on the Water Supply Plug in the RefrigeratorLevel the Refrigerator Level the DoorsReplace the Base Grille Start the IcemakerSET the Controls What YOU will Need Shut OFF the Main Water Supply Choose the Valve LocationDrill the Hole for the Valve Tighten the Pipe Clamp Fasten the Shutoff ValveConnect the Tubing To the Valve Route the TubingNormal operating sounds HummmBefore you call for service… Odor/taste See Care and cleaningIce cubes have Small or hollow cubesProduction Temperatures are OKNo water or ice cube But Crushed ICEConsumer Warranty One Year GE Will ReplaceWhat GE Will Not Cover Thirty DaysGeneral Installation/Operation/Maintenance Requirements Performance Data SheetOperating Specifications Special NoticesWater Treatment Device Certificate Number Operating Instructions Safety Instructions Troubleshooting Tips Installation InstructionsWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Page GE Appliances Website Schedule Service Consumer Support

200D26000P022 specifications

The GE 200D26000P022 is a highly advanced and versatile industrial motor designed by General Electric for various heavy-duty applications. Known for its robust performance and durability, this motor is integral to many manufacturing and processing environments.

One of the primary features of the GE 200D26000P022 is its impressive power output, making it suitable for demanding applications that require high torque and efficiency. The motor operates on a high voltage, which allows for significant energy savings and improved operational efficiency. Its design includes a host of advanced engineering features that enhance its performance, including higher speed ratings and excellent thermal management.

Incorporating state-of-the-art technologies, the GE 200D26000P022 integrates permanent magnet motor technology, which enhances its efficiency compared to traditional induction motors. This results in lower energy consumption, reducing operating costs and minimizing the environmental impact. The motor's design also emphasizes minimal maintenance requirements, allowing users to enjoy extended service life with reduced downtime.

Another notable characteristic of the GE 200D26000P022 is its adaptability. This motor can seamlessly be integrated into various applications, including pumps, compressors, and conveyors. Its ability to function in diverse environments, including those with harsh conditions, is a testament to its robust engineering design. The motor is constructed with high-quality materials that provide resistance to corrosion, heat, and mechanical stress.

Additionally, the GE 200D26000P022 is equipped with advanced control systems. These systems allow for precise speed and torque management, enhancing overall operational efficiency. The motor can be controlled using various protocols, making it compatible with numerous industrial automation frameworks. This feature facilitates easier integration into modern smart factories and automation solutions.

In summary, the GE 200D26000P022 stands out for its powerful performance, energy efficiency, and versatility. Its innovative technologies and robust characteristics make it an ideal choice for industries seeking reliable motor solutions capable of handling heavy loads and demanding conditions. As a result, it continues to be a preferred option for professionals in the industrial sector looking to enhance their operations.
Top Page Image Contents