GE 200D26000P022 installation instructions Safety Precautions

Page 2

Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

Use this appliance only for its intended purpose as described in this Owner’s Manual.

SAFETY PRECAUTIONS

When using electrical appliances, basic safety precautions should be followed, including the following:

Consumer Support Troubleshooting Tips Installation Instructions Operating Instructions

■This refrigerator must be properly installed and located in accordance with the Installation Instructions before it is used.

■Do not allow children to climb, stand or hang on the shelves in the refrigerator. They could damage the refrigerator and seriously injure themselves.

■Do not touch the cold surfaces in the freezer compartment when hands are damp or wet. Skin may stick to these extremely cold surfaces.

■Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

■In refrigerators with automatic icemakers, avoid contact with the moving parts of the ejector mechanism, or with the heating element located on the bottom of the icemaker. Do not place fingers or hands on the automatic icemaking mechanism while the refrigerator

is plugged in.

■Keep fingers out of the “pinch point” areas; clearances between the doors and between the doors and cabinet are necessarily small. Be careful closing doors when children are in the area.

■Unplug the refrigerator before cleaning and making repairs.

NOTE: We strongly recommend that any servicing be performed by a qualified individual.

■Setting either or both controls to 0 (off) does not remove power to the light circuit.

■Do not refreeze frozen foods which have thawed completely.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Side by Side Serial #Safety Precautions Refrigerants Operating InstructionsBefore You Throw Away Your Old Refrigerator or Freezer HOW to Connect Electricity Instructions Operating InstructionsHow to Use About the temperature controlsTroubleshooting Tips Consumer Support About TurboCool on some modelsAbout the water filter on some models When to Replace the FilterInstalling the Filter Cartridge Water Filter CartridgeSlide-Out Spillproof Shelf About the shelves and binsRefrigerator Door Bins and Freezer Door Tilt-Out Bins Slide-Out Freezer Shelves QuickSpace Shelf on some modelsFreezer Baskets Fixed Freezer ShelvesRefrigerator Doors SafetyAbout the refrigerator doors Door AlignmentAbout crisper removal Consumer Support Troubleshooting TipsAbout the crispers and pans About the automatic icemaker Automatic IcemakerConsumer Support Troubleshooting About the ice and water dispenser on some modelsCare and cleaning of the refrigerator InstallationPreparing for Vacation Consumer Support Troubleshooting Tips InstallationBehind the Refrigerator Preparing to MoveReplacing the light bulbs Instructions OperatingTools YOU will Need Before YOU BeginPreparation Moving the Refrigerator Remove the Base GrilleDisconnect the Power Coupling on some models Remove the Freezer DoorRemove the Refrigerator Door Replacing the Doors However, please note the followingRefrigerator Location ClearancesTurn on the Water Supply Plug in the RefrigeratorLevel the Refrigerator Level the DoorsSET the Controls Replace the Base GrilleStart the Icemaker What YOU will Need Drill the Hole for the Valve Shut OFF the Main Water SupplyChoose the Valve Location Tighten the Pipe Clamp Fasten the Shutoff ValveConnect the Tubing To the Valve Route the TubingNormal operating sounds HummmBefore you call for service… Odor/taste See Care and cleaningIce cubes have Small or hollow cubesProduction Temperatures are OKNo water or ice cube But Crushed ICEConsumer Warranty One Year GE Will ReplaceWhat GE Will Not Cover Thirty DaysGeneral Installation/Operation/Maintenance Requirements Performance Data SheetOperating Specifications Special NoticesWater Treatment Device Certificate Number Operating Instructions Safety Instructions Troubleshooting Tips Installation InstructionsWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Page GE Appliances Website Schedule Service Consumer Support

200D26000P022 specifications

The GE 200D26000P022 is a highly advanced and versatile industrial motor designed by General Electric for various heavy-duty applications. Known for its robust performance and durability, this motor is integral to many manufacturing and processing environments.

One of the primary features of the GE 200D26000P022 is its impressive power output, making it suitable for demanding applications that require high torque and efficiency. The motor operates on a high voltage, which allows for significant energy savings and improved operational efficiency. Its design includes a host of advanced engineering features that enhance its performance, including higher speed ratings and excellent thermal management.

Incorporating state-of-the-art technologies, the GE 200D26000P022 integrates permanent magnet motor technology, which enhances its efficiency compared to traditional induction motors. This results in lower energy consumption, reducing operating costs and minimizing the environmental impact. The motor's design also emphasizes minimal maintenance requirements, allowing users to enjoy extended service life with reduced downtime.

Another notable characteristic of the GE 200D26000P022 is its adaptability. This motor can seamlessly be integrated into various applications, including pumps, compressors, and conveyors. Its ability to function in diverse environments, including those with harsh conditions, is a testament to its robust engineering design. The motor is constructed with high-quality materials that provide resistance to corrosion, heat, and mechanical stress.

Additionally, the GE 200D26000P022 is equipped with advanced control systems. These systems allow for precise speed and torque management, enhancing overall operational efficiency. The motor can be controlled using various protocols, making it compatible with numerous industrial automation frameworks. This feature facilitates easier integration into modern smart factories and automation solutions.

In summary, the GE 200D26000P022 stands out for its powerful performance, energy efficiency, and versatility. Its innovative technologies and robust characteristics make it an ideal choice for industries seeking reliable motor solutions capable of handling heavy loads and demanding conditions. As a result, it continues to be a preferred option for professionals in the industrial sector looking to enhance their operations.
Top Page Image Contents