USING THE COLD WATER DISPENSER
Using the Water dispenser (RF261B)
Place a glass underneath the |
|
water outlet and push gently |
|
against the water dispenser |
|
lever with your glass. Make |
|
sure the glass is in line with |
|
the dispenser to prevent the | PUSH |
water from splashing out. |
|
If you have just installed the refrigerator or installed a new
water filter, Flush 3 gallons through filter before use (flush approximately 6 minutes). Make sure water flows cleanly before drinking.
If you have a long vacation or business trip, caution close the water valve and shut off the water
supply to the Refrigerator. This will help prevent accidental leakages.
Water clouding phenomenon
All water provided to refrigerators flows through the core filter which is an alkaline water filter. In this process, the pressure in the water that has flowed out of the filter gets increased, and oxygen and nitrogen become saturated. When this water flows out in the air, the pressure plummets and the oxygen and nitrogen get supersaturated so that they turn into gas bubbles. The water could look misty due to these oxygen bubbles.The water may look temporarily cloudy due to these oxygen bubbles. After a few seconds, the water will look clear.
The water tank’s capacity is approximately one third (1/3) of a gallon.
Please wait 1 second before removing the cup after dispensing water to prevent spills.
02operating
operating _15
2012.3.29 9:28:43AM