GE 200D9366P004 About the automatic icemaker. on some models, Automatic Icemaker

Page 10

Instructions

About the automatic icemaker. (on some models)

A newly installed refrigerator may take 12 to 24 hours to begin making ice.

Operating Instructions Safety

Power

Switch

Icemaker

Green

Feeler Arm

Power

Light

 

Automatic Icemaker

The icemaker will produce seven cubes per cycle— approximately 100–130 cubes in a 24-hour period, depending on freezer compartment temperature, room temperature, number of door openings and other use conditions.

See below for how to access ice and reach the power switch.

If the refrigerator is operated before the water connection is made to the icemaker, set the power switch in the O (off) position.

When the refrigerator has been connected to

the water supply, set the power switch to the l (on) position. The icemaker power light will turn green when the freezer light switch is pressed in or when the freezer door is closed.

The icemaker will fill with water when it cools to 15°F (–10°C). A newly installed refrigerator may take 12 to 24 hours to begin making ice cubes.

You will hear a buzzing sound each time the icemaker fills with water.

Throw away the first few batches of ice to allow the water line to clear.

Be sure nothing interferes with the sweep of the feeler arm.

When the bin fills to the level of the feeler arm, the icemaker will stop producing ice. It is normal for several cubes to be joined together.

If ice is not used frequently, old ice cubes will become cloudy, taste stale and shrink.

NOTE: In homes with lower-than-average water pressure, you may hear the icemaker cycle multiple times when making one batch of ice.

NOTE: Set the power switch to the O (off) position if the water supply is shut off.

Shelf

Ice Bin

To reach the power switch.

Accessing Ice and Reaching the Power Switch

To reach the icemaker power switch, pull

the shelf above the ice bin straight out. Always be sure to replace the shelf.

To access ice, simply pull the bin forward.

Shelf

Ice Bin

To access ice.

Consumer Support Troubleshooting Tips

Icemaker Accessory Kit

If your refrigerator did not come already equipped

Check the back of the refrigerator for the specific

with an automatic icemaker, an icemaker

icemaker kit needed for your model.

accessory kit is available at extra cost.

 

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Ge.com Write the model and serial numbers here Model # Serial #Before You Throw Away Your Old Refrigerator or FreezerHOW to Connect Electricity Ge.comAbout the controls with temperature settings About the water filter. on some models When to Replace the FilterInstalling the Filter Cartridge Water Filter CartridgeRearranging the Shelves Non-Adjustable Shelves on the Door on some modelsAbout the shelves and bins To removeAbout the crispers and pans Adjustable Humidity Crisper on some modelsFruit and Vegetable Crisper Freezer Shelves and Baskets When replacing the deep full-width basketAbout the freezer drawer. on some models Basket RemovalFreezer Shelf and Basket Non-Adjustable Shelf on Freezer DoorAbout the freezer compartment. on some models Fixed Shelf RemovalAbout the automatic icemaker. on some models Icemaker Accessory KitTo reach the icemaker power switch, pull Automatic IcemakerCleaning the Outside Care and cleaning of the refrigeratorCleaning the Inside Preparing for Vacation Behind the RefrigeratorPreparing to Move Refrigerator Lights Replacing the light bulbsFreezer Light Tools YOU MAY Need Before YOU BeginPreparation Moving the Refrigerator IndoorsClearances Connecting the Refrigerator to the House Water LineRefrigerator Location Removetop CAP cont. on some modelsPlug in the Refrigerator ContTurn on the Water Supply PUT Therefrigerator in PlaceRemove the Fresh Food Door Handle Remove the FreezerdoorhandleAttach the Fresh Food Door Handle Attach the FreezerdoorhandleSET the Controls Leveling legs have 2 purposesRemovethedrawerfront RemovethebasketRemovethedrawerfront Remove the Base GrilleReplace the Freezer Basket Attachand Securethedrawer Front TotheslidesTools YOU will Need Reversingthedoorswing Single Door Refrigerator Models onlyImportant Notes Removethe Refrigerator DoorTransfer Center Hinge Bracket Remove the Freezer DoorRemove Bottom Hinge and Leveling LEG Rehangfreezerdoor Transfer Refrigerator Doorhandle TorightRehangrefrigeratordoor Install the Logo BadgeDouble Door Refrigerator Models only Removecenterhinge Removing the Doors Double Door Refrigerator Models onlyRemovetherefrigerator Doors Removeopposite DoorReplaceopposite Door Install CenterhingeRehangrefrigeratordoors Align Double DoorsInstalling the Water Line Icemaker Models What YOU will NeedChoose the Valve Location Shut OFF the Main Water SupplyDrill the Hole for the Valve Tighten the Pipe Clamp Fasten the Shutoff ValveConnect the Tubing to the Valve Route the TubingBefore you call for service… Normal operating soundsConsumer Support Troubleshooting Tips See About the controlsSee Replacing the light bulbs Handle is loose Handle needs adjusting Should be positioned verticallyGE Service Protection Plus Warranty Registration Department Box Louisville, KYConsumer Product Ownership Registration Model NumberOwnership Registration Page GE and Geprofilemodels One Year GE Will ReplaceWhat GE Will Not Cover Thirty DaysWhat is not Covered Terms and ConditionsGeneral Installation/Operation/Maintenance Requirements Performance Data SheetOperating Specifications Special NoticesWater Treatment Device

200D9366P004 specifications

The GE 200D9366P004 is a high-performance component designed for various industrial applications, particularly in power generation and distribution systems. This device is a part of General Electric’s extensive lineup of electrical components, renowned for their durability and operational efficiency.

One of the main features of the GE 200D9366P004 is its robust design capacity, built to handle significant electrical loads while maintaining stability and safety. The component is engineered to comply with rigorous industry standards, ensuring not only reliability but also longevity in harsh operational environments. This makes it suitable for a range of applications, from power plants to critical infrastructure systems.

In terms of technologies, the GE 200D9366P004 incorporates advanced electric and electronic control systems that enhance its operational capabilities. This includes state-of-the-art monitoring technologies that provide real-time data on performance metrics, allowing for prompt detection of anomalies and facilitating proactive maintenance strategies. This predictive capability is crucial in minimizing downtime and extending the lifecycle of the equipment.

The operating characteristics of the GE 200D9366P004 are particularly noteworthy. It is designed for optimal thermal performance, ensuring that heat dissipation is managed efficiently. This helps in maintaining consistent performance even under high operational loads. Additionally, the component features advanced insulating materials that contribute to its reliability and efficiency, reducing the risks associated with electrical failures.

Another notable characteristic is its modular design, which simplifies installation and maintenance processes. This modularity allows for easier upgrades and repairs, making it a flexible choice for many organizations looking to enhance their operational efficiency without extensive downtime.

Overall, the GE 200D9366P004 stands out in the industrial landscape for its combination of advanced technology, rugged reliability, and operational efficiency. Whether utilized in power generation, industrial automation, or management of critical electrical infrastructure, this component exemplifies GE’s commitment to quality and innovation in electrical solutions, making it a preferred choice for professionals aiming to achieve high-performance standards in their operations.
Top Page Image Contents