GE 200D9366P004 operating instructions Before YOU Begin, Preparation, Tools YOU MAY Need

Page 14

Installation Instructions

Refrigerator

Models 20 and 22

Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: ge.com

In Canada, call 1.800.561.3344 or Visit our Website at: www.geappliances.ca

BEFORE YOU BEGIN

Read these instructions completely and carefully.

•IMPORTANT — Save these instructions for local inspector’s use.

•IMPORTANT — Observe all governing codes and ordinances.

•Note to Installer – Be sure to leave these instructions with the Consumer.

•Note to Consumer – Keep these instructions for future reference.

•Skill level – Installation of this appliance requires basic mechanical skills.

•Completion time – Refrigerator Installation

20 minutes

Water Line Installation

30minutes

•Proper installation is the responsibility of the installer.

•Product failure due to improper installation is not covered under the Warranty.

PREPARATION

MOVING THE REFRIGERATOR INDOORS

If the refrigerator will not fit through a doorway, the refrigerator door and freezer drawer can be removed.

•To remove the refrigerator door, see Step 1 in the Reversing the Door Swing section.

•To remove the freezer drawer, see the Removing the Freezer Drawer section.

WATER SUPPLY TO THE ICEMAKER AND DISPENSER (ON SOME MODELS)

If the refrigerator has an icemaker, it will have to be connected to a cold water line. A GE water supply kit (containing tubing, shutoff valve, fittings and instructions) is available at extra cost from your dealer, by visiting our Website at ge.com

(in Canada at www.geappliances.ca) or from Parts and Accessories, 800.626.2002

(In Canada 1.888.661.1616).

TOOLS YOU MAY NEED

Adjustable Wrench

3/8″ and 5/16″ Socket

Ratchet/Driver

 

1/4″ Outer Diameter

 

Compression Nut

Phillips Head Screwdriver

and Ferrule (sleeve)

 

(icemaker models only)

 

3/32″, 1/8″ and 3/16″ Allen

 

wrenches

1/8″ Drill Bit and

Tape measure

Electric or Hand Drill

 

Pencil

1/4″ Nut Driver

 

Wire Cutters

Level

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Ge.com Write the model and serial numbers here Model # Serial #Before You Throw Away Your Old Refrigerator or FreezerHOW to Connect Electricity Ge.comAbout the controls with temperature settings About the water filter. on some models When to Replace the FilterInstalling the Filter Cartridge Water Filter CartridgeRearranging the Shelves Non-Adjustable Shelves on the Door on some modelsAbout the shelves and bins To removeFruit and Vegetable Crisper Adjustable Humidity Crisper on some modelsAbout the crispers and pans Freezer Shelves and Baskets When replacing the deep full-width basketAbout the freezer drawer. on some models Basket RemovalFreezer Shelf and Basket Non-Adjustable Shelf on Freezer DoorAbout the freezer compartment. on some models Fixed Shelf RemovalAbout the automatic icemaker. on some models Icemaker Accessory KitTo reach the icemaker power switch, pull Automatic IcemakerCleaning the Inside Care and cleaning of the refrigeratorCleaning the Outside Preparing to Move Behind the RefrigeratorPreparing for Vacation Freezer Light Replacing the light bulbsRefrigerator Lights Tools YOU MAY Need Before YOU BeginPreparation Moving the Refrigerator IndoorsClearances Connecting the Refrigerator to the House Water LineRefrigerator Location Removetop CAP cont. on some modelsPlug in the Refrigerator ContTurn on the Water Supply PUT Therefrigerator in PlaceRemove the Fresh Food Door Handle Remove the FreezerdoorhandleAttach the Fresh Food Door Handle Attach the FreezerdoorhandleSET the Controls Leveling legs have 2 purposesRemovethedrawerfront RemovethebasketRemovethedrawerfront Remove the Base GrilleReplace the Freezer Basket Attachand Securethedrawer Front TotheslidesTools YOU will Need Reversingthedoorswing Single Door Refrigerator Models onlyImportant Notes Removethe Refrigerator DoorRemove Bottom Hinge and Leveling LEG Remove the Freezer DoorTransfer Center Hinge Bracket Rehangfreezerdoor Transfer Refrigerator Doorhandle TorightDouble Door Refrigerator Models only Install the Logo BadgeRehangrefrigeratordoor Removecenterhinge Removing the Doors Double Door Refrigerator Models onlyRemovetherefrigerator Doors Removeopposite DoorReplaceopposite Door Install CenterhingeRehangrefrigeratordoors Align Double DoorsInstalling the Water Line Icemaker Models What YOU will NeedDrill the Hole for the Valve Shut OFF the Main Water SupplyChoose the Valve Location Tighten the Pipe Clamp Fasten the Shutoff ValveConnect the Tubing to the Valve Route the TubingBefore you call for service… Normal operating soundsConsumer Support Troubleshooting Tips See About the controlsSee Replacing the light bulbs Handle is loose Handle needs adjusting Should be positioned verticallyGE Service Protection Plus Warranty Registration Department Box Louisville, KYConsumer Product Ownership Registration Model NumberOwnership Registration Page GE and Geprofilemodels One Year GE Will ReplaceWhat GE Will Not Cover Thirty DaysWhat is not Covered Terms and ConditionsGeneral Installation/Operation/Maintenance Requirements Performance Data SheetOperating Specifications Special NoticesWater Treatment Device

200D9366P004 specifications

The GE 200D9366P004 is a high-performance component designed for various industrial applications, particularly in power generation and distribution systems. This device is a part of General Electric’s extensive lineup of electrical components, renowned for their durability and operational efficiency.

One of the main features of the GE 200D9366P004 is its robust design capacity, built to handle significant electrical loads while maintaining stability and safety. The component is engineered to comply with rigorous industry standards, ensuring not only reliability but also longevity in harsh operational environments. This makes it suitable for a range of applications, from power plants to critical infrastructure systems.

In terms of technologies, the GE 200D9366P004 incorporates advanced electric and electronic control systems that enhance its operational capabilities. This includes state-of-the-art monitoring technologies that provide real-time data on performance metrics, allowing for prompt detection of anomalies and facilitating proactive maintenance strategies. This predictive capability is crucial in minimizing downtime and extending the lifecycle of the equipment.

The operating characteristics of the GE 200D9366P004 are particularly noteworthy. It is designed for optimal thermal performance, ensuring that heat dissipation is managed efficiently. This helps in maintaining consistent performance even under high operational loads. Additionally, the component features advanced insulating materials that contribute to its reliability and efficiency, reducing the risks associated with electrical failures.

Another notable characteristic is its modular design, which simplifies installation and maintenance processes. This modularity allows for easier upgrades and repairs, making it a flexible choice for many organizations looking to enhance their operational efficiency without extensive downtime.

Overall, the GE 200D9366P004 stands out in the industrial landscape for its combination of advanced technology, rugged reliability, and operational efficiency. Whether utilized in power generation, industrial automation, or management of critical electrical infrastructure, this component exemplifies GE’s commitment to quality and innovation in electrical solutions, making it a preferred choice for professionals aiming to achieve high-performance standards in their operations.
Top Page Image Contents